Panasonic WJHD200 WJHD200 User Guide - Page 88

G DISK MENU 8 Disk Menu The menu appears if the hard disk error is found during power-up. The buzzer beeps every 5 seconds, and the ERROR indicator turns off. Press any button other than [STOP] to mute the buzzer beep. DISK MENU NO.1:117.95GB NO.2:117.95GB REMOVE LINK→ HDD FORMAT → RESTART → SET→ SET→ SET→ Hard Disk Status Operation The hard disk status and required operations are shown in the table. Abbreviation Status Capacity Normal status ERR Writing error Required - Format, remove link ,or replace HDD if erred even after formatting. Note WR1 or WR2 appears in SYSTEM LOG when indicating a writing error. LOST or * status was left for Same as above. five minutes. * Awaiting format Restart or Format All existing HDD have been previously used in another WJ-HD200. LOST HDD physically removed Remove link, or add a new HDD. HDD is removed without executing REMOVE LINK command. ADD HDD added, and awaiting format Format - Previous time and this time, HDD physically or logically removed REMOVE LINK command has been previously carried out. You can implement any of the following operations as necessary. REMOVE LINK: Logically removes the HDD link. HDD FORMAT: Formats the HDD. RESTART: Closes the menu, and restarts the recorder. The menu can also be displayed manually when you need to format the HDD or remove the logical link. 1. Turn off the power of the recorder once, and turn it on again. The multiscreen monitor displays the message "SYSTEM CHECK DONE! TO OPEN DISK MENU, PUSH STOP KEY". 2. Press the [STOP] button. The DISK MENU opens. 3. Select REMOVE LINK, HDD FORMAT, or RESTART. Auto-remove When no button is pressed for 5 minutes after opening the DISK MENU, the recorder will logically remove a disk that meets any of the conditions below. • An HDD has been categorized as " * ", "LOST", or "ERR". • Restart was repeated 3 times due to writing error. 88