Panasonic WJHD200 WJHD200 User Guide - Page 26
Recording Mode Setup PROG1-4, SETUP, NO. 1-4, Alarm Recording Mode Setup ALM, REC MODE
View all Panasonic WJHD200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
G Recording Mode Setup (PROG1-4 SETUP, NO. 1-4) Parameters for internal timer recording are assigned to each event (NO. 1-4) of the program (PROG 1-4) in this menu. There are five recording modes available: super fine (SF), fine (FQ), normal (NQ), long-time (EX) and optional (SP). If combined with audio recording (-A), the number of recording modes doubles. The selected recording mode determines the remaining recording time displayed on the monitor. In the SP mode, the field rate and picture quality are variable and can be selected at option in the range of 0.1 to 30 FPS with five quality level options respectively. After the recording mode is selected, the available recording time is determined and displayed. Rec Mode Quality SF-xxxH Super Fine FQ-xxxH Fine NQ-xxxH Normal EX-xxxH Long time SF-AxxxH Super Fine FQ-AxxxH Fine NQ-AxxxH Normal EX-AxxxH Long time SP-AxxxH Optional setup SP-xxxH Optional setup Audio Record Note N/A N/A N/A N/A Available Available Available Available Available Field rate, quality selected optionally N/A Field rate, quality selected optionally Notes: • For the recording modes other than SP, items suffixed "xxx" in the table will be replaced by a calculated recording time of 24, 48, 72, 96, 120, 170, 180, 240, 480, 960, 1 200, 1 440, 2 160, 2 880, or 8 640 hours. The selected recording mode with the preset rate and quality will determine the suffix. • Even if preset to 30 or 15 FPS, the actual recording rate may drop to 7.5 FPS at worst while busy multitasks task such as playback, remote-access playback, remote-access live image, FTP access, multisplit display, or video motion detection are carried out simultaneously. The status display will indicate "*PLAY" while playing back the images recorded with a rate different from the preset. • Suffix "xxx" following "SP-" is specified in REC MODE TABLE in the ADDENDUM attached to the manual. 1. Move the cursor to MODE, and press the JogDial. The mode area will be highlighted. 2. Select a recording mode using the JogDial, and press the Jogdial. Audio data will be recorded when a mode with hyphen A is selected. Available recording mode: SF, FQ, NQ, EX, SP, SF-A, FQ-A, NQ-A, EX-A, and SP-A 3. When SP or SP-A is selected, specify a recording rate (REC RATE) using the JogDial, and press the JogDial. Available recording rates: From 0.1 to 30 FPS 4. When SP or SP-A is selected, specify a recording quality (REC QUALITY) using the JogDial, and press the JogDial. Available recording qualities: SUPER FINE, FINE, NORMAL, EXTENDED G Alarm Recording Mode Setup (ALM REC MODE) Alarm events arising within the time zone specified by the program will start recording with the preset parameters. Refer to "PROG NO. SETUP" described above in this menu for operating procedures and available parameters, since they are very similar. G Pre-alarm Recording (PRE ALM REC) Picture recording will start prior to the alarm activation at the time specified by this setting. 1. Move the cursor to PRE ALARM REC with the [D] or [C] button. 2. Select the desired pre-recording time with the JogDial, and press the JogDial. The default is 0S. Available times (seconds): 0S, 1S, 2S, 3S, 4S, and 5S 26