Panasonic WJHD200 WJHD200 User Guide - Page 31

3. Select either ON or OFF with the JogDial. The default is ON for all cameras. ON: Enables camera title display, title registration, and position selection. OFF: Disables the camera title functions. 4. Press the JogDial (SET) to validate the selection. When ON is selected, go to the following steps. The cursor moves to the title edit area. When OFF is selected, return to step 2 above, or press the [SETUP/ESC] button to escape from the CAMERA TITLE menu. 5. 5-1 Select a character for the digit with the JogDial. Each title is identical to the camera number: 1, 2, 3, and so forth as the default. Available characters are as follows. 0~9 A~Z 5-2 Press the JogDial to validate the selection for the digit. The selected character is displayed on the digit, and the cursor goes to the right digit. 5-3 Press the [SETUP/ESC] button to move the cursor back to the previous digit. 5-4 Repeat steps 5-1, 5-2 and 5-3 until all digits are entered. 5-5 Press the JogDial when the cursor is on the right end digit to validate the entered title. The cursor moves to the POSI. column. Note: A bullet (centered dot) stands for a space used for deleting entered characters. 6. Select a display position with the JogDial. The default setting for cameras 1, 2, 5, and 6 is RLOWER, for cameras 3, 4, 7, and 8 R-UPPER. R-LOWER: Displays the camera title in the lower right corner. R-UPPER: Displays the camera title in the upper right corner. L-LOWER: Displays the camera title in the lower left corner. L-UPPER: Displays the camera title in the upper left corner. Note: When the 9-split screen is displayed, the camera title position is fixed to R-LOWER. 7. Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup. I System Setup (SYSTEM SETUP) There are two pages of the system setup. To turn a new page, continue to move the cursor with the [D] or [C] button. SYSTEM SETUP (1 OF 2) PASSWORD LOCK OFF ALL→ ***** OPERATION→ ***** KEYLOCK BUZZ ON SKIP ALM-RECALL 1PAGE SIMUL REC&PLAY ON ALTER DETECT OFF DISK END MODE CONTINUE DISK END BUZZ ON SYSTEM SETUP (2 OF 2) PLAY PRIORITY LOCAL TIME ADJUST SETUPO AUTO ERASING OFF G Password Lock Setup (PASSWORD LOCK) A five-digit password is entered to protect all settings, recorded pictures, and operating status against erroneous operation and tampering. Settings alone can be also protected from unauthorized access. While the LOCK indicator on the front panel is on, a message "NOW KEY LOCKED!" is displayed to warn unauthorized operators. If accessed in this condition, the buzzer beeps. OPERATE ALARM TIMER SUSPEND REMOTE RESET LOCK DST OSD SE SYSTEM SETUP (1 OF 2) PASSWORD LOCK OFF ALL→ ***** OPERATION→ ***** KEYLOCK BUZZ ON SKIP ALM-RECALL 1PAGE SIMUL REC&PLAY ON ALTER DETECT OFF DISK END MODE CONTINUE DISK END BUZZ ON 1. Move the cursor to PASSWORD LOCK with the [D] or [C] button. 31