Pioneer DVR-520H-S Owner's Manual - Page 18

02 Connecting up Connecting to a cable box or satellite receiver (2) If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup. Using the setup on this page you can: • Record any channel by selecting it on the cable box/satellite tuner. • Record using the Auto Start Recording feature (see Automatic recording from a satellite tuner on page 54). Important • Do not connect this recorder 'through' your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amp/receiver. TV VHF/UHF IN A/V IN 1 2 1 OUT IN VHF/UHF OUTPUT 1 R L R L INPUT 1/ AUTO START REC Y PB PR COMPONENT VIDEO OUT AUDIO VIDEO S-VIDEO OUTPUT 2 AUDIO VIDEO INPUT 3 S-VIDEO IN OPTICAL CONTROL DIGITAL OUT AC IN 1 3 VHF/UHF OUT VHF/UHF IN 1 A/V OUT Cable box/ Satellite receiver Antenna/cable TV wall outlet 1 Connect RF antenna cables as shown. This enables you to watch and record TV channels. 2 Connect the AUDIO and VIDEO OUTPUT jacks (1 or 2) on this recorder to a set of audio/video inputs on your TV using a set of A/V cables (as supplied). This enables you to watch discs. 3 Connect the audio/video output of your cable box/satellite tuner to the INPUT 1/AUTO START REC jacks on this recorder using a set of A/V cables. This enables you to record scrambled TV channels. Note • The setup on this page does not allow you to watch one channel and record another. • The diagram shows standard video connections, but you can alternatively use the S-video or component video connections if they're available. 18 En