Pioneer VSX-45TX Owner's Manual

Pioneer VSX-45TX Manual

Get Pioneer VSX-45TX PDF manuals and user guides View all Pioneer VSX-45TX manuals
Add to My Manuals
Save this manual to your list of manuals

Pioneer VSX-45TX manual content summary:

  • Pioneer VSX-45TX | Owner's Manual - Page 1
    AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-45TX Operating Instructions
  • Pioneer VSX-45TX | Owner's Manual - Page 2
    buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. IMPORTANT NOTICE H006AEn The serial number for this equipment
  • Pioneer VSX-45TX | Owner's Manual - Page 3
    3
  • Pioneer VSX-45TX | Owner's Manual - Page 4
    Accessories 7 Preparing the Remote Control 7 Loading the batteries 7 Remote Control Battery Indicator 7 Operating range of remote control unit 8 Installing the Receiver 8 Opening the Front Panel 8 Easy Setup Guide Part 1 9 Home Theater: The Basics 9 1) Your Home System 9 2) The Source
  • Pioneer VSX-45TX | Owner's Manual - Page 5
    Accessories 7 Preparing the Remote Control 7 Loading the batteries 7 Remote Control Battery Indicator 7 Operating range of remote control unit 8 Installing the Receiver 8 Opening the Front Panel 8 Easy Setup Guide Part 1 9 Home Theater: The Basics 9 1) Your Home System 9 2) The Source
  • Pioneer VSX-45TX | Owner's Manual - Page 6
    the receiver makes trouble-free set up a snap. With the microphone equipped remote control plugged into the front panel with the remote control cable best in home theater for the minimum of effort. Dolby Digital EX, DTS-ES, DTS 96/24 and the Latest Audio and Video Formats The VSX-45TX is equipped
  • Pioneer VSX-45TX | Owner's Manual - Page 7
    /TUIOLTNIOTFVSFYCOSNTTEM RECEIVER Î Remote Control Unit FM Wire Antenna "AA" IEC LR6 batteries x 4 Operating Instructions Operating Instructions Microphone for Auto Surround Sound Setup Microphone Stand for Auto Surround Sound Setup Preparing the Remote Control Loading
  • Pioneer VSX-45TX | Owner's Manual - Page 8
    remote control to operate the VSX-45TX is fairly large. To use, point the remote control toward the remote sensor on the front panel of this unit while within the range shown below. Remote control TUNINEXGTRA MENU RETURENXIT AMP SETUP 30 30 23 feet (7m) Installing the Receiver CAUTION! • Do
  • Pioneer VSX-45TX | Owner's Manual - Page 9
    and enjoyable home theater sound. First hook up your equipment, like your DVD player, TV and speakers. Then follow the Easy Setup Guide instructions to set up your system for surround sound. It is very important you do one of the surround sound setups to get optimal sound from your receiver. For
  • Pioneer VSX-45TX | Owner's Manual - Page 10
    Setup Guide Part1 Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. 1 Hooking Up Your DVD Player & TV In order to use Dolby Digital/DTS soundtracks, which are at the heart of home theater settings of this receiver CONTROL USB IN REMOTE
  • Pioneer VSX-45TX | Owner's Manual - Page 11
    SETUP instructions from page 13 in this Easy Setup Guide. If possible, use surround back speakers. These speakers are important to take full advantage of all the sound channels on new, eight channel home theater OUT OUT2 CONTROL R L LINE USB IN AUDIO PR Å REMOTE IN R setting of the receiver
  • Pioneer VSX-45TX | Owner's Manual - Page 12
    Setup Guide Part1 3 Setting up the Main Unit 1 Plug the AC power cord into a wall outlet. 2 Press the STANDBY/ON button to switch the receiver 1 Turn on the receiver and your TV, press the RECEIVER button on the remote control. 2 Press the SYSTEM SETUP button. The SYSTEM SETUP menu appears on your
  • Pioneer VSX-45TX | Owner's Manual - Page 13
    and your TV. Make sure your TV is set to this receiver as you will use the on-screen displays (OSDs) on your TV to follow these instructions. 4 If you have a subwoofer turn it on. 5 Press the RECEIVER button on the remote control. 6 Press the SYSTEM SETUP button and use the on-screen display (OSD
  • Pioneer VSX-45TX | Owner's Manual - Page 14
    Subwoofer [Next ] [Exit ] [SMALL] [SMALL] [SMALL] [SMALLX2] [ YES ] 8 Select AUTO SETTING with the 5∞ buttons and press ENTER. 9 Some auto setup instructions will be listed, make sure to follow them. Make sure you have: hooked up the microphone and moved obstacles to the speakers out of the way
  • Pioneer VSX-45TX | Owner's Manual - Page 15
    the DVD/LD button on the remote control. You should see DVD/LD in the display on the receiver. 3 Play a DVD then adjust the MASTER VOLUME. memo To get a more refined sound, make the sound settings in "Expert setup" (see page 96). If you're having trouble getting surround sound playback look at
  • Pioneer VSX-45TX | Owner's Manual - Page 16
    MPEG FM UNBAL 75Ω OUT1 IN OUT OUT2 CONTROL R L IN 1 (TV/ PLAY SAT OUT REC CD IN PHONO/ LINE USB IN AUDIO R L DIGITAL AUDIO AM PB MULTI-ROOM & SOURCE PR REMOTE IN Y PB PR RS-232C receiver and from the receiver to your TV (or monitor). If you don't follow the default settings
  • Pioneer VSX-45TX | Owner's Manual - Page 17
    setup your DVD player for component video output as well. See your DVD manual FM UNBAL 75Ω OUT1 IN OUT OUT2 CONTROL R L IN 1 PLAY (TV/ OUT REC CD IN PHONO/ LINE USB IN AUDIO R L DIGITAL AUDIO AM PB MULTI-ROOM & SOURCE PR REMOTE IN Y PB PR RS-232C the default settings you will
  • Pioneer VSX-45TX | Owner's Manual - Page 18
    receiver to the recorder must be the same type. ASSIGNABLE PCM/ 2DIGITAL / DTS/MPEG FM UNBAL 75Ω OUT1 IN OUT OUT2 CONTROL R L IN 1 PLAY (TV/ SAT) IN IN 2 CD-R/ (CD-R/ TAPE1 TAPE1) OUT REC IN 3 (DVD/ LD) IN 4 (CD) PLAY IN MD/ TAPE2 OUT REC CD IN PHONO/ LINE USB SOURCE PR REMOTE IN Y
  • Pioneer VSX-45TX | Owner's Manual - Page 19
    how you connected the receiver to your TV ( /MPEG FM UNBAL 75Ω OUT1 IN OUT OUT2 CONTROL R L IN 1 (TV/ PLAY SAT) IN TAPE2 OUT REC CD IN PHONO/ LINE USB IN AUDIO R L DIGITAL AUDIO AM LOOP ANTENNA PB MULTI-ROOM & SOURCE PR REMOTE IN Y PB PR RS-232C the default settings you will need
  • Pioneer VSX-45TX | Owner's Manual - Page 20
    MPEG FM UNBAL 75Ω OUT1 IN OUT OUT2 CONTROL R L IN 1 PLAY (TV/ SAT) TAPE2 OUT REC CD IN PHONO/ LINE USB IN AUDIO R L DIGITAL AUDIO AM LOOP Setup (see page 94) and choose the LINE setting. If your turntable has a phono pre-amplifier (most do not) please choose the LINE setting
  • Pioneer VSX-45TX | Owner's Manual - Page 21
    PCM/ 2DIGITAL / DTS/MPEG FM UNBAL 75Ω OUT1 IN OUT OUT2 CONTROL R L IN 1 PLAY (TV/ SAT) IN IN 2 CD ) PLAY IN MD/ TAPE2 OUT REC CD IN PHONO/ LINE USB IN AUDIO R L DIGITAL AUDIO AM LOOP ANTENNA MULTI-ROOM & SOURCE IN 1 PB MULTI-ROOM & SOURCE PR REMOTE IN Y PB PR RS-232C (TV/SAT)
  • Pioneer VSX-45TX | Owner's Manual - Page 22
    below. The VSX-45TX has two receiver). Hook up your digital equipment in accordance with this receiver's default settings DTS/MPEG FM UNBAL 75Ω OUT1 IN OUT OUT2 CONTROL R L IN 1 PLAY (TV/ SAT) IN MD/ TAPE2 OUT REC CD IN PHONO/ LINE USB AUDIO IN R L DIGITAL AUDIO AM LOOP ANTENNA
  • Pioneer VSX-45TX | Owner's Manual - Page 23
    components will be in sync with the names on the remote control buttons and the like. To avoid having to assign the digital inputs you can hook up your equipment in accordance with the receiver's default settings. The default settings are: DIGITAL IN 1 (optical): TV/SAT DIGITAL IN 2 (optical): CD
  • Pioneer VSX-45TX | Owner's Manual - Page 24
    should noticeably improve sound quality. FM wire antenna AM loop antenna ASSIGNABLE PCM/ 2DIGITAL / DTS/MPEG FM UNBAL 75Ω OUT1 IN OUT OUT2 CONTROL R L IN 1 PLAY (TV/ SAT) IN IN 2 CD-R/ (CD-R/ TAPE1 TAPE1) OUT AM LOOP ANTENNA MULTI-ROOM & SOURCE MULTI-ROOM & SOURCE MONITOR OUT PRE
  • Pioneer VSX-45TX | Owner's Manual - Page 25
    home setup will vary. Simply connect the speakers you have in the manner described below. One of the latest features of home theater setting of the receiver IN OUT OUT2 CONTROL R L IN IN PHONO/ LINE USB IN AUDIO R L SOURCE SPEAKERS PR Å REMOTE IN R FRONT L manual for details.) 25
  • Pioneer VSX-45TX | Owner's Manual - Page 26
    SPEAKERS TONE TONE CONTROL BASS/TREBLE SETUP MIC MULTI JOG/ENTER DIGITAL IN S-VIDEO VIDEO VIDEO INPUT L AUDIO R First put the receiver in STANDBY mode, then press the power button while holding down the SPEAKERS button. The receiver will reset to the new impedance setting. With this method
  • Pioneer VSX-45TX | Owner's Manual - Page 27
    guide, for more information see pages 109 & 110. Also, it is very important for speaker placement to read the instructions Be sure to read your speaker manuals for the best placement of the power consumption such as heaters, irons, or television sets to the AC OUTLET in order to avoid overheating
  • Pioneer VSX-45TX | Owner's Manual - Page 28
    the lower third of the panel. 3 1 2 45 6 7 8 9 10 11 AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-45TX STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI CHANNNEL ACOUSTIC CALIBRATION MULTI JOG CONTROL SET UP RETURN SIGNAL HI-BIT SELECT HI-SAMPLING SB CH MODE BAND CLASS STATION
  • Pioneer VSX-45TX | Owner's Manual - Page 29
    the receiver. 12 MULTI JOG CONTROL buttons SET UP Press to switch the SYSTEM SETUP mode. RETURN Press to move back one step in the SYSTEM SETUP the multi room feature (requires an optional PIONEER Multi-Room Remote Sensor Unit MR-100 or another IR receiver). CONTROL button (see pages 74-79) Used
  • Pioneer VSX-45TX | Owner's Manual - Page 30
    your TV. 30 3 MULTI CONTROL buttons These buttons are the basic controls that switch the mode of the receiver and the remote control, which allows you to control your other components. TV CONT: Press so that the remote control can operate the TV control commands. 4 Number buttons These can be used
  • Pioneer VSX-45TX | Owner's Manual - Page 31
    it will turn off all PIONEER components. Secondly, any component that has programmed into the SYSTEM OFF settings will be turned off. For RECEIVER button Use this button to switch the remote control into receiver mode in order to get certain receiver functions or do receiver setups. # TOP MENU/GUIDE
  • Pioneer VSX-45TX | Owner's Manual - Page 32
    . ^ VOLUME (+/-) buttons Use to raise or lower the volume of the receiver. & MIDNIGHT button (see page 51) Switches the MIDNIGHT listening mode on or REMOTE SETUP button. Use to customize the remote control functions and the remote control itself. (See "Setting Up the Remote Control to Control Other
  • Pioneer VSX-45TX | Owner's Manual - Page 33
    is on. 5 TONE indicator Lights when the TONE control is on. 6 DNR indicator Lights when DIGITAL NR is on. 7 TUNER indicators STEREO: Lights when an FM stereo broadcast is received in the auto stereo mode. MONO: Lights when the tuner is set to receive FM broadcasts and when MPX mode is selected
  • Pioneer VSX-45TX | Owner's Manual - Page 34
    CD IN PHONO/ LINE USB IN AUDIO R L DIGITAL settings PIONEER equipment, that has a CONTROL terminal, so that you can control them all by pointing the remote control(s) at one remote sensor. 4 Radio antenna terminals (see page 24) Hook up antennas for the radio tuner built into the receiver
  • Pioneer VSX-45TX | Owner's Manual - Page 35
    different rooms. 11 SPEAKERS terminals (see page 25) Use these terminals to connect speakers to the receiver. The FRONT, CENTER and SURROUND terminals are for the main speaker system and the SURROUND BACK speakers can be set to either the main system, the SECOND ZONE, or the MULTI ROOM. See page 37
  • Pioneer VSX-45TX | Owner's Manual - Page 36
    , and look at the display, on the Front Panel. 1 Turn on the receiver and your TV. Press SETUP the RECEIVER button on the remote control. S0URCE TV SYSTEM RECEIVER Make sure your TV is connected and set to the video input OFF the receiver is using. DVD/LD TV/SAT VCR1/ DVR TV CONT MULTI
  • Pioneer VSX-45TX | Owner's Manual - Page 37
    fill that role also for the VSX-45TX. If starting fresh, complete steps 1-3 in page 36. 1 SIGNAL SEL 5 VIDEO SEL 9 SYSTEM SETUP MENU TUNER EDIT AUDIO MPX ¶ TUNING - 1 2 3 4 DNR BASS/TREBLE + 6 7 8 HI-BIT +10 - DISC 0 ENTER DIRECT ACCESS SEARCH MODE GUIDE TOP MENU ENTER TRACK EXIT
  • Pioneer VSX-45TX | Owner's Manual - Page 38
    setup menus. When you get a menu you want to adjust press ENTER. STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI JOG CONTROL SET UP NO. SURRBACK SP setting: If you connected a SURROUND speaker(s) select YES, if you didn't select NO. ROOM SIZE setting: Tell the receiver your room size
  • Pioneer VSX-45TX | Owner's Manual - Page 39
    on pages 13-15. If you feel the settings in the AUTO SURROUND SOUND SETUP do not suit your personal tastes, the settings you input here will override them and allow you to adjust the parameters manually. AUTO SURROUND SOUND SETUP with the microphone may not properly assess the size of your speakers
  • Pioneer VSX-45TX | Owner's Manual - Page 40
    and set up the receiver to match the speakers you have hooked up. Complete steps 1-2 on page 39 to start. FRONT (default setting is SMALL chose NO for SURROUND SPEAKERS, you won't be able to choose this setting. • Select the number of surround back speakers you have. You can choose one speaker, two
  • Pioneer VSX-45TX | Owner's Manual - Page 41
    SEL 9 SYSTEM SETUP MENU TUNER EDIT AUDIO MPX ¶ TUNING - 1 HI-BIT +10 - DISC 0 ENTER DIRECT ACCESS SEARCH MODE GUIDE TOP MENU ENTER TRACK EXIT RETURN DTV ON/OFF 8 BAND 3 DISP MODE SUB TITLE TUNING + ¡ 1-6 1-6 STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI JOG CONTROL SET UP
  • Pioneer VSX-45TX | Owner's Manual - Page 42
    SEL 9 SYSTEM SETUP MENU TUNER EDIT AUDIO MPX ¶ TUNING - 1 HI-BIT +10 - DISC 0 ENTER DIRECT ACCESS SEARCH MODE GUIDE TOP MENU ENTER TRACK EXIT RETURN DTV ON/OFF 8 BAND 3 DISP MODE SUB TITLE TUNING + ¡ 1-5 1-5 STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI JOG CONTROL SET UP
  • Pioneer VSX-45TX | Owner's Manual - Page 43
    following steps show you how to set the delay time for each channel by specifying the distances from your listening position to each speaker. Once you specify the speaker distances (or it is done automatically in the Easy Setup Guide), the receiver calculates the correct delay times automatically
  • Pioneer VSX-45TX | Owner's Manual - Page 44
    MODE SURROUND STEREO/ DIRECT ENTER SB CH MODE MUTE REMOTE SETUP Î 2 3 6 24 4 STANDBY/ON MOVIE MUSIC ENTER MULTI JOG AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-45TX STANDBY MULTI CHANNNEL ACOUSTIC CALIBRATION MULTI JOG CONTROL SET UP RETURN SIGNAL HI-BIT SELECT HI-SAMPLING SB CH
  • Pioneer VSX-45TX | Owner's Manual - Page 45
    DVD/LD, TV/SAT, VIDEO, CD, CDR/TAPE1. The default setting is ANALOG for: VCR1/DVR, VCR2, MD/TAPE2, TUNER, PHONO. The default setting is DIGITAL for USB. 2 SETUP S0URCE TV SYSTEM RECEIVER OFF DVD/LD TV/SAT VCR1/ DVR MULTI CONTROL VCR2 VIDEO CD TV CONT MULTI OPERATION CD-R/ TAPE1 MD/ TAPE2
  • Pioneer VSX-45TX | Owner's Manual - Page 46
    mode types on the receiver are explained here (to This is explained below as well. For home theater the MOVIE and MUSIC listening modes are designed to deliver setup settings and you can still use ACOUSTIC CALIBRATION EQ, DIGITAL NR, MIDNIGHT, LOUDNESS, HI-BIT HI-SAMPLING mode, and TONE Control
  • Pioneer VSX-45TX | Owner's Manual - Page 47
    sound sources. With these modes the receiver will automatically employ the format of channels. Next, there are six PIONEER original sound modes that use DSP THX CINEMA THX is a set of technical standards created by display will show either 5-D THEATER or 7-D THEATER according to the source, SB
  • Pioneer VSX-45TX | Owner's Manual - Page 48
    are for pure decoding of multichannel sound sources. With these modes the receiver will automatically employ the format of the sound source (for example, first four modes will create surround channels. Then there are five PIONEER original sound modes that use DSP (Digital Signal Processing) to create
  • Pioneer VSX-45TX | Owner's Manual - Page 49
    , SCI-FI, DRAMA, MUSICAL, MONOFILM, 5/7-D THEATER. The DSP MUSIC modes are: CLASSICAL, CHAMBER, JAZZ, ROCK, DANCE. The following instructions show you how to adjust the amount of effect. SETUP S0URCE TV SYSTEM RECEIVER OFF DVD/LD TV/SAT VCR1/ DVR MULTI CONTROL VCR2 VIDEO CD TV CONT MULTI
  • Pioneer VSX-45TX | Owner's Manual - Page 50
    CHANNEL RECEIVER VSX-45TX MULTI CHANNNEL ACOUSTIC CALIBRATION STATION TUNING SELECT TUNER EDIT MULTI ROOM & SOURCE CONTROL ON/OFF STEREO/DIRECT MULTI CH IN ACOUSTIC EQ MASTER VOLUME memo • After completing the AUTO SURROUND SETUP (page 13) ACOUSTIC EQ ON (ALL CH ADJUST) is set automatically
  • Pioneer VSX-45TX | Owner's Manual - Page 51
    IN or LOUDNESS modes. • If you set MIDNIGHT on when in DIRECT mode the receiver switches to STEREO mode. Listening in LOUDNESS SETUP DIRECT ACCESS SEARCH MODE GUIDE MENU TOP MENU TUNER EDIT ENTER TRACK EXIT AUDIO RETURN 1 1 Press RECEIVER. 2 Press the LOUDNESS button on the remote control
  • Pioneer VSX-45TX | Owner's Manual - Page 52
    STATION TUNING SELECT TUNER EDIT MULTI ROOM & SOURCE CONTROL ON/OFF PHONES SPEAKERS TONE TONE CONTROL BASS/TREBLE SETUP MIC MULTI JOG/ENTER DIGITAL IN S-VIDEO VIDEO VIDEO INPUT L AUDIO R 1 Press RECEIVER. 2 Press the TONE button on the remote control or the front panel to put the
  • Pioneer VSX-45TX | Owner's Manual - Page 53
    CH IN playback follow the instructions below. BASIC TV INPUT TV CONTROL TV VOL TV CH INPUT MIDNIGHT MULTI CH INPUT VOLUME MOVIE MUSIC MODE ACOUSTIC EQ SURROUND STEREO/ DIRECT ENTER SB CH MODE MUTE REMOTE SETUP Î 1 1 AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-45TX MULTI CHANNNEL ACOUSTIC
  • Pioneer VSX-45TX | Owner's Manual - Page 54
    MODE SURROUND STEREO/ DIRECT ENTER SB CH MODE MUTE REMOTE SETUP Î 1 MULTI JOG CONTROL SET UP RETURN SIGNAL HI-BIT SELECT HI-SAMPLING SB CH a stereo signal you must choose the NEO:6 MOVIE/MUSIC SURROUND mode or a Pioneer original sound mode (see pages 47-48). VIRTL SB AUTO: same as above
  • Pioneer VSX-45TX | Owner's Manual - Page 55
    TONE TONE CONTROL BASS/TREBLE SETUP MIC MULTI JOG/ENTER DIGITAL IN S-VIDEO VIDEO VIDEO INPUT L AUDIO R 1 1 Press the RETURN button for more than three seconds to put the receiver in DUAL MONO mode. Hold down the RETURN button to cycle through the different DUAL MONO settings. When you
  • Pioneer VSX-45TX | Owner's Manual - Page 56
    PHONO, USB or functions the VIDEO SELECT will be set to off.) After choosing a video input the display on the receiver will SETUP DIRECT ACCESS SEARCH MODE GUIDE MENU TOP MENU TUNER EDIT ENTER TRACK EXIT AUDIO RETURN 1 1 Press RECEIVER. 2 Use the display DIMMER button on the remote control
  • Pioneer VSX-45TX | Owner's Manual - Page 57
    CONTROL PHONES SPEAKERS TONE TONE CONTROL BASS/TREBLE SETUP MIC MULTI JOG/ENTER DIGITAL IN S-VIDEO VIDEO VIDEO INPUT L AUD 1 23 1 Press the TUNER button. On the remote, this selects the tuner function on the receiver and sets the remote other stations. For Manual Tuning • To change
  • Pioneer VSX-45TX | Owner's Manual - Page 58
    CONTROL TV VOL TV CH INPUT MIDNIGHT MULTI CH INPUT VOLUME MOVIE MUSIC ACOUSTIC EQ MODE SURROUND STEREO/ DIRECT ENTER SB CH MODE MUTE REMOTE SETUP Î 1 3 2 1 Press the TUNER button. This selects the tuner function on the receiver and sets the remote 4 Use the number buttons to enter the
  • Pioneer VSX-45TX | Owner's Manual - Page 59
    MOVIE MUSIC ACOUSTIC EQ MODE SURROUND STEREO/ DIRECT ENTER SB CH MODE MUTE REMOTE SETUP Î 5 4 STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI CHANNNEL ACOUSTIC CALIBRATION MULTI JOG CONTROL SET UP RETURN SIGNAL HI-BIT SELECT HI-SAMPLING SB CH MODE BAND CLASS STATION
  • Pioneer VSX-45TX | Owner's Manual - Page 60
    rather than the frequency number, will appear on your display. SETUP 4 2 S0URCE TV SYSTEM RECEIVER OFF DVD/LD TV/SAT VCR1/ DVR MULTI CONTROL VCR2 VIDEO CD TV DIRECT ENTER SB CH MODE MUTE REMOTE SETUP Î 1 5,6 5 3 1 Press the TUNER button on the remote control. 2 Press DTV MENU CLASS
  • Pioneer VSX-45TX | Owner's Manual - Page 61
    + TV INPUT TV CONTROL TV VOL TV CH INPUT MIDNIGHT MULTI CH INPUT VOLUME MOVIE MUSIC MODE ACOUSTIC EQ SURROUND STEREO/ DIRECT ENTER SB CH MODE MUTE REMOTE SETUP Î 1 2 1 Press the TUNER button. This selects the TUNER function on the receiver and sets the remote to the TUNER operation
  • Pioneer VSX-45TX | Owner's Manual - Page 62
    to recall the setting stored in the remote control. Once a setting is recalled and the component assigned, you can use this remote to easily operate the component. memo • To exit from the remote control setup mode at any time, press REMOTE SETUP. • See "Using Remote Control with Other Components
  • Pioneer VSX-45TX | Owner's Manual - Page 63
    deck to the input jacks marked VCR 2 on the back of the receiver. This method should help you customize the remote control for your system and let you control all of your components with the remote control for the VSX-45TX. 8 Repeat the process from step 2 for all of your components. 9 Select EXIT
  • Pioneer VSX-45TX | Owner's Manual - Page 64
    steps can also be used to add further operations to the remote control that were successfully set with the stored settings (see pages 62-63). memo • To exit from the remote control setup mode at any time, press REMOTE SETUP. • You can also program the 5˜∞˜2˜3 and ENTER buttons with the LEARNING
  • Pioneer VSX-45TX | Owner's Manual - Page 65
    CD TV CONT MULTI OPERATION VCR2 VIDEO VCR1/ DVR MULTI CONTROL SAT TV DVD/LD S0URCE TV SYSTEM RECEIVER OFF SETUP 5 While LEARN continues to flash, point the two remote controls toward each other. Press the button on the other remote control corresponding to the operation you want to program
  • Pioneer VSX-45TX | Owner's Manual - Page 66
    receiver's remote control after you program it (see "Setting Up the Remote Control to Control Other Components," pages 62-65). • To perform these operations, press the MULTI CONTROL button for the component you want to control. • For more information on individual commands consult the manual guide
  • Pioneer VSX-45TX | Owner's Manual - Page 67
    the receiver's remote control after you program it (see "Setting Up the Remote Control to Control Other Components," pages 62-65). • To perform these operations, press the MULTI CONTROL button for the component you want to control. • For more information on individual commands consult the manual
  • Pioneer VSX-45TX | Owner's Manual - Page 68
    not going through the VSX-45TX. To get around this problem you set the DIRECT FUNCTION for VCR 2 to OFF. Now when you press VCR 2 function button you can control the external video deck with the remote but the receiver does not go into VCR 2 mode. 3 2,4 SETUP S0URCE TV SYSTEM RECEIVER OFF DVD/LD
  • Pioneer VSX-45TX | Owner's Manual - Page 69
    / DVR MULTI CONTROL VCR2 VIDEO CD TV CONT MULTI OPERATION CD-R/ TAPE1 MD/ TAPE2 TUNER RECEIVER DIMMER LOUDNESS 1 2 TONE EFFECT/CH SEL 3 4 SIGNAL SEL 5 VIDEO SEL 9 DNR BASS/TREBLE + 6 7 8 HI-BIT +10 - DISC 0 ENTER SYSTEM SETUP DIRECT ACCESS SEARCH MODE GUIDE MENU TOP MENU
  • Pioneer VSX-45TX | Owner's Manual - Page 70
    Using Other Functions SECOND ZONE (Speaker System B) Setup Stereo playback in another room This setup enables you to listen to a pair of stereo speakers independently of the main speaker system (A speakers) hooked up to the receiver. The VSX-45TX has two possibilities for playback in another room.
  • Pioneer VSX-45TX | Owner's Manual - Page 71
    the receiver on when doing the setup below (you can if you want). The USB port can only receive 2 channel soundtracks. USB device controls on USB drivers by following the instructions on your PC monitor. Your PC should automatically recognize the new USB connection and a dialog box concerning USB
  • Pioneer VSX-45TX | Owner's Manual - Page 72
    WindowsR XP: Start\ Settings\ Control Panel. Click on Multimedia Properties, select USB Audio Device [1] for Playback of Audio. Close window. For other OS the path will be slightly different but nearly the same. 6 Switch on the receiver. 7 Use the INPUT button on the remote control or the MULTI JOG
  • Pioneer VSX-45TX | Owner's Manual - Page 73
    receiver has more than sufficient power for any home / DTS/MPEG FM UNBAL 75Ω OUT1 IN OUT OUT2 CONTROL R L IN 1 PLAY (TV/ SAT) IN IN IN MD/ TAPE2 OUT REC CD IN PHONO/ LINE USB IN AUDIO R L DIGITAL AUDIO AM LOOP ANTENNA MULTI-ROOM set up the SURRBACK SYSTEM (see page 37). EXPERT 73
  • Pioneer VSX-45TX | Owner's Manual - Page 74
    to change the source but forget the remote control it's not a problem. While in MULTI ROOM mode the input selector on the front panel of the VSX45TX is able to change the input even though the receiver is off. MULTI ROOM connections On the VSX-45TX, connect the IR receiver sensor to the MULTI ROOM
  • Pioneer VSX-45TX | Owner's Manual - Page 75
    /LD) IN 1 PB MULTI-ROOM & SOURCE SPEAKERS PR Å REMOTE IN R FRONT L ª Y PB PR RS-232C · (TV/SAT) IN 2 COMPONENT VIDEO AC OUTLET CENTER R SURROUND L SURROUND BACK / ı R L ª · IR receiver (MR-100) memo If you use the above setup controlling the main room source will affect the sound in
  • Pioneer VSX-45TX | Owner's Manual - Page 76
    with a PIONEER representative to be sure. If you selected MR&S in the SURRBACK SYSTEM setting on page 37 you won't be able to set the VOLUME LEVEL. 1 Turn on the receiver, your TV and press RECEIVER on the remote control. Make sure your TV is set to the receiver. 2 Press the SYSTEM SETUP button
  • Pioneer VSX-45TX | Owner's Manual - Page 77
    -CHANNEL RECEIVER VSX-45TX The display shown below will illuminate when the receiver is in STANDBY mode. Also, the MULTI ROOM indicator will light. MULTI CHANNNEL ACOUSTIC CALIBRATION SB CH MODE BAND CLASS STATION TUNING SELECT TUNER EDIT MULTI ROOM & SOURCE CONTROL ON/OFF ONTROL E SETUP
  • Pioneer VSX-45TX | Owner's Manual - Page 78
    Number button (0~9) when you want to control the VSX-45TX only you will also change the settings in the sub room. To avoid this, cover up the remote sensor on the sub room amplifier. Sub room Main room STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX
  • Pioneer VSX-45TX | Owner's Manual - Page 79
    operate other PIONEER components simply by pointing the receiver's remote control at the remote sensor on the front panel of the receiver. The receiver then sends the remote control signals to the other devices via the CONTROL OUT terminal. IN CONTROL OUT Receiver CONTROL IN OUT SETUP S0URCE TV
  • Pioneer VSX-45TX | Owner's Manual - Page 80
    receiver (or any Pioneer component used) to go on, it (or they) will do so automatically when multi operations are performed. memo Be sure to set up each component before programming multi operations (see "Setting Up the Remote Control to Control Other Components", pages 62-65). 3,6 2,4,5 SETUP
  • Pioneer VSX-45TX | Owner's Manual - Page 81
    will return to the REMOTE SETUP menu. Start again from step 2 if you want to set do another MULTI CONTROL button. 10 Select EXIT and press ENTER again. You will exit the REMOTE SETUP menu and return to normal operation. memo You don't need to program power on for PIONEER components (except for the
  • Pioneer VSX-45TX | Owner's Manual - Page 82
    each component before programming the SYSTEM OFF function (see "Setting Up the Remote Control to Control Other Components", pages 62-65). 5 2-4 8-9 SETUP S0URCE TV SYSTEM RECEIVER OFF DVD/LD TV/SAT VCR1/ DVR MULTI CONTROL VCR2 VIDEO CD TV CONT MULTI OPERATION CD-R/ TAPE1 MD/ TAPE2 TUNER
  • Pioneer VSX-45TX | Owner's Manual - Page 83
    use the SYSTEM OFF function. Using Other Functions SETUP S0URCE TV SYSTEM RECEIVER OFF DVD/LD TV/SAT VCR1/ DVR MULTI CONTROL VCR2 VIDEO CD TV CONT MULTI OPERATION CD-R/ TAPE1 MD/ TAPE2 TUNER RECEIVER 1 1 Press the SYSTEM OFF button. The remote control must be on to be able to use this
  • Pioneer VSX-45TX | Owner's Manual - Page 84
    the remote control for different MULTI CONTROL buttons (DVD/LD, etc.). For example, you could change TV to DVD2. In this way you can personalize your system. This is similar to the feature on page 93 but that feature changes the display on the receiver. SETUP 3 2,4-7 S0URCE TV SYSTEM RECEIVER OFF
  • Pioneer VSX-45TX | Owner's Manual - Page 85
    LABEL capability to rename the display on the remote control for different buttons (keys). You would want to do this if you taught a specific button a new operation. SETUP 3 2,5-8 S0URCE TV SYSTEM RECEIVER OFF DVD/LD TV/SAT VCR1/ DVR MULTI CONTROL VCR2 VIDEO CD TV CONT MULTI OPERATION CD
  • Pioneer VSX-45TX | Owner's Manual - Page 86
    5∞ buttons to select HIGH, LOW, or EXIT and press ENTER. HIGH : The brightest setting LOW : A dimmer setting OFF : Turns the remote control light off. EXIT : Leaves the LIGHT setting and returns you to the REMOTE SETUP menu. After pressing ENTER in the first three cases, COMPLETE will appear in the
  • Pioneer VSX-45TX | Owner's Manual - Page 87
    Using Other Functions Clearing Remote Control Settings You Have Input This feature allows you to clear a particular setting, or all of the settings from a function in the REMOTE SETUP menu. SETUP 4 2,3 6-7 S0URCE TV SYSTEM RECEIVER OFF DVD/LD TV/SAT VCR1/ DVR MULTI CONTROL VCR2 VIDEO CD TV
  • Pioneer VSX-45TX | Owner's Manual - Page 88
    -CHANNEL RECEIVER VSX-45TX STANDBY MULTI CHANNNEL ACOUSTIC CALIBRATION MULTI JOG CONTROL SET UP RETURN SIGNAL HI-BIT SELECT HI-SAMPLING SB CH MODE BAND CLASS STATION TUNING SELECT TUNER EDIT MULTI ROOM & SOURCE CONTROL ON/OFF PHONES SPEAKERS TONE TONE CONTROL BASS/TREBLE SETUP
  • Pioneer VSX-45TX | Owner's Manual - Page 89
    up your digital components in a different way than the default settings you need to tell the receiver how you hooked them up so the names on the remote control and front panel match your home setup. Do this with the DIGITAL-IN SELECT setup. Also, if you hooked up video devices with component video
  • Pioneer VSX-45TX | Owner's Manual - Page 90
    CONTROL SET UP RETURN SIGNAL HI-BIT SELECT HI-SAMPLING SB CH MODE BAND PHONES SPEAKERS TONE TONE CONTROL BASS/TREBLE (If you are continuing from page 89 you can skip the first two steps.) 1 Turn on the receiver and your TV, press RECEIVER on the remote control. 2 Press the SYSTEM SETUP
  • Pioneer VSX-45TX | Owner's Manual - Page 91
    page 89 you can skip the first two steps.) 1 Turn on the receiver and your TV, press RECEIVER on the remote control. 2 Press the SYSTEM SETUP button. 3-8 2 STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI JOG CONTROL SET UP RETURN SIGNAL HI-BIT SELECT HI-SAMPLING SB CH MODE BAND
  • Pioneer VSX-45TX | Owner's Manual - Page 92
    and your TV, press RECEIVER on the remote control. 2 Press the SYSTEM SETUP button. 3 Looking at the on-screen display on your TV, use the 5∞ buttons to select INPUT ASSIGN. Press the ENTER button. STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI JOG CONTROL SET UP RETURN SIGNAL HI
  • Pioneer VSX-45TX | Owner's Manual - Page 93
    89 you can skip the first two steps.) 1 Turn on the receiver and your TV. (If you want to use the remote control for this setup, press the RECEIVER button.) 2 Press the SET UP button. The possible selections are shown below. ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789 space
  • Pioneer VSX-45TX | Owner's Manual - Page 94
    SIGNAL SEL 5 DNR BASS/TREBLE + 6 7 8 press RECEIVER on the remote 2 VIDEO SEL 9 SYSTEM SETUP MENU TUNER EDIT AUDIO HI-BIT +10 - DISC 0 ENTER DIRECT ACCESS SEARCH MODE GUIDE TOP MENU ENTER TRACK EXIT RETURN 3-6 control. 2 Press the SYSTEM SETUP button. MPX ¶ TUNING - 1 DTV ON/OFF
  • Pioneer VSX-45TX | Owner's Manual - Page 95
    receiver and your TV, press RECEIVER on the remote control. 3-7 2 2 Press the SYSTEM SETUP button. STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI JOG CONTROL SET LINE [OFF] CD [OFF] CD-R/TAPE1 [OFF] MD/TAPE2 [OFF] USB [OFF] TUNER [OFF] [Exit ] 3 Looking at the on-screen
  • Pioneer VSX-45TX | Owner's Manual - Page 96
    ] [Fine Channel Delay ] [Acoustic Cal EQ ] [Bass Peak Level ] [D-Range Control ] [Exit ] 1 Turn on the receiver and your TV, press RECEIVER on the remote control. Make sure your TV is set to the receiver. 2 Press the SYSTEM SETUP button. The menu possibilities appear on your TV. 3 SURROUND
  • Pioneer VSX-45TX | Owner's Manual - Page 97
    SEARCH MODE GUIDE MENU TOP MENU TUNER EDIT ENTER TRACK EXIT AUDIO RETURN MPX ¶ TUNING - 1 STATION - 4 CHANNEL - DTV ON/OFF 8 BAND 3 DTV MENU CLASS 7 DISP MODE SUB TITLE TUNING + ¡ STATION + ¢ CHANNEL+ 1-3 1-3 STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI JOG CONTROL SET UP
  • Pioneer VSX-45TX | Owner's Manual - Page 98
    GUIDE MENU TOP MENU TUNER EDIT ENTER TRACK EXIT AUDIO RETURN MPX ¶ TUNING - 1 STATION - 4 CHANNEL - DTV ON/OFF 8 BAND 3 DTV MENU CLASS 7 DISP MODE SUB TITLE TUNING + ¡ STATION + ¢ CHANNEL+ 1-5 1-5 STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI JOG CONTROL SET the receiver
  • Pioneer VSX-45TX | Owner's Manual - Page 99
    NORMAL setup ( GUIDE MENU TOP MENU TUNER EDIT ENTER TRACK EXIT AUDIO RETURN MPX ¶ TUNING - 1 STATION - 4 CHANNEL - DTV ON/OFF 8 BAND 3 DTV MENU CLASS 7 DISP MODE SUB TITLE TUNING + ¡ STATION + ¢ CHANNEL+ 1-6 1-6 STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI JOG CONTROL SET
  • Pioneer VSX-45TX | Owner's Manual - Page 100
    set automatically if you did the AUTO SURROUND SOUND SETUP (see pages 13-15), which we strongly recommend. It balances the frequency response between your speakers. In order to follow the instructions in this section you should have done AUTO SURROUND SOUND SETUP on pages 13-15. This receiver lets
  • Pioneer VSX-45TX | Owner's Manual - Page 101
    characteristics of the sound. ALL CH ADJUST: In this method all the speakers (except for the subwoofer) are independent. The settings that were input when you did the AUTO SURROUND SETUP (see pages 13-15) will be present but you can adjust each speaker individually to suit your taste. The test tones
  • Pioneer VSX-45TX | Owner's Manual - Page 102
    the setup by using the 5∞ buttons to select EXIT and pressing ENTER. You can now go to DATA CHECK or leave the ACOUSTIC CAL EQ setting you want to check. Press ENTER. That channel appears so you can check the setting. 4 When that channel has been checked, use the 5∞ buttons to select the EXIT
  • Pioneer VSX-45TX | Owner's Manual - Page 103
    8 HI-BIT +10 - DISC 0 ENTER SYSTEM SETUP DIRECT ACCESS SEARCH MODE GUIDE MENU TOP MENU TUNER EDIT ENTER TRACK EXIT AUDIO RETURN MPX DTV ON/OFF DISP MODE ¶ 8 SUB TITLE 1-5 1-5 STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI JOG CONTROL SET UP RETURN SIGNAL HI-BIT
  • Pioneer VSX-45TX | Owner's Manual - Page 104
    8 HI-BIT +10 - DISC 0 ENTER SYSTEM SETUP DIRECT ACCESS SEARCH MODE GUIDE MENU TOP MENU TUNER EDIT ENTER TRACK EXIT AUDIO RETURN MPX DTV ON/OFF DISP MODE ¶ 8 SUB TITLE 1-6 1-6 STANDBY/ON MOVIE MUSIC ENTER MULTI JOG STANDBY MULTI JOG CONTROL SET UP RETURN SIGNAL HI-BIT
  • Pioneer VSX-45TX | Owner's Manual - Page 105
    & Problem-solving (as an example) appear in the receiver's display. In this example, the number +4 dB is the differ- ence between the receiver's gain structure and the Dolby Digital • For receivers and components other than the VSX-45TX Dolby Pro Logic II may not have the above mentioned functions
  • Pioneer VSX-45TX | Owner's Manual - Page 106
    Techno Tidbits & Problem-solving Dolby Digital Surround EX This new recording technology is able to back channel, the realism and all-encompassing nature of the sound reaches levels not seen before in home theater. This unit is equipped with a DTS-ES decoder. DTS Neo:6 This is a matrix decoding
  • Pioneer VSX-45TX | Owner's Manual - Page 107
    home theater environment. The Bass Peak Level Manager allows you to set the maximum peak levels appropriate to your system. (Set this function according to the Bass Peak Level instructions at http://www.dolby.com. Only receiver and controller products bearing the THX Surround EX logo, when in
  • Pioneer VSX-45TX | Owner's Manual - Page 108
    MD/TAPE2 ] USB [ USB ] [Exit ] 5 5.PHONO/LINE Setup [PHONO ] [LINE ] [Exit ] 6 6. Multi Room Volume Level [VARIABLE ] IR Receiver [PIONEER ] [Exit] [Acoustic Cal EQ ] [Bass Peak Level ] [D-Range Control ] [Exit ] 108 Speaker Setting [ Free ] [ THX ] Front Center Surround SurrBack
  • Pioneer VSX-45TX | Owner's Manual - Page 109
    Problem speaker stands to support your speakers. instructions below for optimum placement of each set of speakers. C C F L C F R F L F R F L F R 45~60 If you're using a CENTER speaker set the FRONT speakers to a wider angle. If not, set listener than for home theater playback. Surround
  • Pioneer VSX-45TX | Owner's Manual - Page 110
    Techno Tidbits & Problem-solving Speaker Placement for a Complete THX Speaker System If you have a complete THX Speaker System set (LucasFilm authorized), follow the diagram below to place your follow the diagram at right as opposed to the home theater setups of the preceding pages. 60˚ 120˚ 110
  • Pioneer VSX-45TX | Owner's Manual - Page 111
    you have a heat dispersal and ventilation problem so please follow the instructions in "Installing the Receiver" (page 8) carefully. • Turn the receiver off, unplug from wall and call a Pioneer-accredited repair center to look at the problem. Setup The setup screen doesn't appear. • The output
  • Pioneer VSX-45TX | Owner's Manual - Page 112
    volume is turned down. • Speakers are turned off. • DIGITAL/ANALOG setting is incorrect. • MULTI CH IN mode is on. Remedy • Make sure the component/speakers are connected correctly (see pages 16-26). • Press MUTING on the remote control. • Adjust MASTER VOLUME. • Press SPEAKERS (A/B) to select the
  • Pioneer VSX-45TX | Owner's Manual - Page 113
    components. Other audio problems Subwoofer output is very manual for the correct settings. • Choose one of the listening modes (see pages 46-48). The MULTI CH IN switches off automatically. • Set causing the noise or move it away from the receiver. • Place the antenna farther away from the equipment
  • Pioneer VSX-45TX | Owner's Manual - Page 114
    remote control repeatedly to return to the default setting (see page 56). • Make sure the digital connections (see pages 17-19 & 22-23) and the DIGITAL IN SELECT (see page 91) are done correctly. • Turn MULTI CH IN mode off (see page 53). • Play the source. • Fix the audio settings (check the manual
  • Pioneer VSX-45TX | Owner's Manual - Page 115
    SELECT is set to ANALOG Remedy • SET the SIGNAL SELECT to AUTO (see page 45). Remote control Cannot be remote controlled. • The remote control batteries have worn out. • Too far away or improper angle of operation. • There is an obstacle between the receiver and the remote control. • Strong light
  • Pioneer VSX-45TX | Owner's Manual - Page 116
    the list will not work for the model that you are using. If you can't find a preset code brands that matches the component you want to control, you can still teach the remote individual commands from another remote control (see pages 64-65). DVD Brand PIONEER DENON JVC PHILIPS PANASONIC RCA SAMSUNG
  • Pioneer VSX-45TX | Owner's Manual - Page 117
    Techno Tidbits & Problem-solving TV Brand PIONEER ADMIRAL AIWA AKAI ALBA AOC BESTAR BLAUPUNKT BLUE SKY BRANDT BROCSONIC BUSH CLATRONIC CRAIG CROSLEX CURTIS MATHIS DAEWOO DAYTRON DUAL EMERSON FERGUSON FIRST FISHER FUJITSU
  • Pioneer VSX-45TX | Owner's Manual - Page 118
    Techno Tidbits & Problem-solving ELECTR N• STRIES •A ONIC INDU EIA EST 1924 SSOCIATIO your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level: • Start your volume control at a low setting. • Slowly increase the sound until
  • Pioneer VSX-45TX | Owner's Manual - Page 119
    FM wire Antenna 1 AM loop Antenna 1 "AA" IEC LR6 batteries 4 Remote Control Unit 1 Microphone for Auto Surround Sound Setup 1 Microphone Stand for Auto Surround Sound Setup ........ 1 Operating Instructions 1 NOTE: Specifications and the design are subject to possible modifications without
  • Pioneer VSX-45TX | Owner's Manual - Page 120
    OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. 178-184 Boundary Road, Braeside, Victoria 3195
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
VSX-45TX
Operating Instructions