Pioneer VSX-45TX Owner's Manual - Page 114
Surround EX or DTS ES
View all Pioneer VSX-45TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Techno Tidbits & Problem-solving Symptom Video No image is output when a function is selected. There is no image coming from the selected component video jacks. Can't record video. Input/display The display is dark. You can't get DIGITAL to come up when using the SIGNAL SELECT button. The digital format indicator doesn't light up even when playing a non-PCM digital source. A compressed digital source is being played, but the digital format indicators don't light up. During playback of a compressed digital source, the PRO LOGIC ll or NEO:6 indicators show in the display. During playback of a Surround EX or DTS ES source on the AUTO setting, the EX and ES indicators won't light. During playback of a DVD audio source, the player shows a transfer rate of 96kHz, but the receiver does not. Cause Remedy • Improper connections. • The input source is not properly selected. • The video input selected on the TV monitor is incorrect. • The TV or monitor is hooked up with cord that is different than that used for the video player. • The component video setting is incorrect. • The MULTI-ROOM is off even though MULTI-ROOM monitor is connected. • Make sure the component is connected correctly (see pages 16, 17-19). • Press the correct function button. • Please read the TV monitor manual and change the settings accordingly. • Use the same cable to connect to your TV and all your video equipment (see pages 16,17-19). • Select the correct COMPONENT IN SELECT setting (see page 92). • Turn MULTI-ROOM on. • The type of cord connected to the TV doesn't match your video input settings. • Change the settings to match the cord connected (see page 16). • The source is copy protected. • You are trying to record a source connected to the component video jacks. • The recorder's video input is hooked up using a different type of cord to the source video output. • You can't record sources that have been copy protected. • Connect the component with S video or composite video cords (see pages 16,17- 19). • Hook up the source and the recorder using the same type of video cord. (see pages 17-19) • The display DIMMER button is pushed. • Either the digital connections or the DIGITAL IN SELECT is incorrect. • MULTI CH IN mode is on. • The player is paused or stopped. • There is a mistake in the player settings for audio output. • Press DIMMER on the remote control repeatedly to return to the default setting (see page 56). • Make sure the digital connections (see pages 17-19 & 22-23) and the DIGITAL IN SELECT (see page 91) are done correctly. • Turn MULTI CH IN mode off (see page 53). • Play the source. • Fix the audio settings (check the manual that came with your DVD player). • Although it's a non-PCM digital source there is a possibility the present track is not the proper format (5.1, 6.1, or 7.1 channel). • There is no problem. The indicator won't light when the track is not a compressed digital source. • The digital signal is not being sent with the source. • The audio is in two channel format. • It has already been Dolby surround encoded. • The source may be 6.1 playback compatible, but there is no signal from the source to indicate this. • Choose DIGITAL or AUTO with the signal select button (see page 45). • This is not a malfunction. Check the manufacturer information for the source. • Switch the SB CH MODE to ON (see page 54). • The multichannel connections are analog, • This is not a malfunction. See the so there is no digital transfer. player's manual for more details. 114