Pioneer VSX-45TX Owner's Manual - Page 74

Multi Room

Page 74 highlights

Using Other Functions MULTI ROOM To use this receiver with a MULTI ROOM setup you need an external IR receiver. When used together with an IR receiver (not included), this receiver is capable of outputting two different sources at the same time. One to the VIDEO OUT jack and SPEAKERS terminals and another to the MULTI ROOM & SOURCE AUDIO and VIDEO OUT jacks. Thus the VSX-45TX can power two independent systems, in separate rooms, listening to or watching different sources. With this system the two rooms can have completely independent power (the main room power can be off while the sub room is on) and the sub room can be controlled by this unit's remote control. If you go into the main room to change the source but forget the remote control it's not a problem. While in MULTI ROOM mode the input selector on the front panel of the VSX45TX is able to change the input even though the receiver is off. MULTI ROOM connections On the VSX-45TX, connect the IR receiver sensor to the MULTI ROOM & SOURCE REMOTE IN jack, then connect a separate amplifier (and speakers) and TV monitor to the MULTI ROOM & SOURCE AUDIO and VIDEO OUT jacks. All of this equipment should be placed in your sub-room as shown below. memo • When connecting the IR receiver, be sure to connect it to the green MULTI ROOM & SOURCE REMOTE IN jack, not the black CONTROL IN or OUT jacks. • It is not possible to input digital signals into the sub room. You must use an analog signal. • You can't use tone controls (etc.) or any surround modes in the sub room. Setup example Sub room Main room ASSIGNABLE PCM/ 2DIGITAL / DTS/MPEG FM UNBAL 75Ω OUT1 IN OUT OUT2 CONTROL R L IN 1 PLAY (TV/ SAT) IN IN 2 CD-R/ (CD-R/ TAPE1 TAPE1) OUT REC IN 3 (DVD/ LD) IN 4 (CD) PLAY IN MD/ TAPE2 OUT REC CD IN PHONO/ LINE USB IN AUDIO R L DIGITAL AUDIO AM LOOP ANTENNA MULTI-ROOM & SOURCE MULTI-ROOM & SOURCE PRE OUT MONITOR OUT CENTER SUB WOOFER R OUT L MONITOR OUT FRONT R L AUDIO IN VCR1/ DVR OUT IN VCR2 OUT TV/ SAT IN R SURROUND R SURROUND BACK R FRONT R SURROUND R SUB WOOFER L L (Single) L L L CEN- TER DVD/ LD IN SURROUND BACK R L VIDEO S VIDEO VIDEO MULTI CH IN ASSIGNABLE MONITOR OUT Y PB 12V TRIGGER (DC OUT12V/ PR 100mA MAX) Y (DVD/LD) IN 1 PB MULTI-ROOM & SOURCE SPEAKERS PR Å REMOTE IN R FRONT L ª Y PB PR RS-232C · (TV/SAT) IN 2 COMPONENT VIDEO AC OUTLET CENTER R SURROUND L SURROUND BACK / ı R L ª · IR receiver (MR-100) Sub room (MR-100, amplifier, speakers and TV monitor) Main room (Receiver, source components, front, center, and surround speakers, TV monitor etc.) 74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

74
Using Other Functions
2
DIGITAL /
DTS/MPEG
OUT1
OUT2
IN
R
L
·
ª
·
ª
R
L
R
R
L
L
(TV/
SAT)
1
IN
1
IN
2
IN
(CD-R/
TAPE1)
2
IN
3
(DVD/
LD)
IN
4
(CD)
USB
AUDIO
PLAY
PLAY
CD-R/
TAPE1
VCR1/
DVR
TV/
SAT
IN
DVD/
LD
IN
SUR-
ROUND
BACK
(Single)
(DVD/LD)
(TV/SAT)
FRONT
CENTER
SUR-
ROUND
SUB
WOOFER
PRE OUT
COMPONENT VIDEO
MONITOR OUT
FRONT
CENTER
SURROUND
SURROUND BACK /
Y
P
B
P
R
Y
P
B
P
R
Y
P
B
P
R
VCR2
CD
PHONO/
LINE
DIGITAL
AUDIO
AUDIO
VIDEO
IN
IN
IN
OUT
OUT
IN
OUT
IN
OUT
IN
OUT
VIDEO
S VIDEO
MD/
TAPE2
REC
REC
AC OUTLET
ASSIGNABLE
MULTI CH IN
SPEAKERS
RS-232C
MULTI-ROOM
& SOURCE
OUT
IN
MONITOR
OUT
CONTROL
75
ANTENNA
AM LOOP
FM UNBAL
R
L
R
L
R
L
L
R
L
R
L
R
MULTI-ROOM
& SOURCE
REMOTE IN
ASSIGNABLE
SUR-
ROUND
BACK
SUR-
ROUND
FRONT
SUB
WOOF-
ER
CEN-
TER
L
R
L
R
L
R
Å
ı
MONITOR OUT
MULTI-ROOM
& SOURCE
12V
TRIGGER
(DC OUT12V/
100mA MAX)
MULTI ROOM
To use this receiver with a MULTI ROOM setup you need an external IR receiver.
When used together with an IR receiver (not included), this receiver is capable of outputting two different
sources at the same time. One to the VIDEO OUT jack and SPEAKERS terminals and another to the MULTI
ROOM & SOURCE AUDIO and VIDEO OUT jacks. Thus the VSX-45TX can power two independent systems, in
separate rooms, listening to or watching different sources. With this system the two rooms can have
completely independent power (the main room power can be off while the sub room is on) and the sub room
can be controlled by this unit's remote control. If you go into the main room to change the source but forget the
remote control it's not a problem. While in MULTI ROOM mode the input selector on the front panel of the VSX-
45TX is able to change the input even though the receiver is off.
MULTI ROOM connections
On the VSX-45TX, connect the IR receiver sensor to the MULTI ROOM & SOURCE REMOTE IN jack, then
connect a separate amplifier (and speakers) and TV monitor to the MULTI ROOM & SOURCE AUDIO and VIDEO
OUT jacks. All of this equipment should be placed in your sub-room as shown below.
When connecting the IR receiver, be sure to connect it to the green MULTI ROOM & SOURCE RE-
MOTE IN jack, not the black CONTROL IN or OUT jacks.
It is not possible to input digital signals into the sub room. You must use an analog signal.
You can't use tone controls (etc.) or any surround modes in the sub room.
Main room
Sub room
IR receiver
(MR-100)
Setup example
Main room
(Receiver, source components,
front, center, and surround
speakers, TV monitor etc.)
Sub room
(MR-100, amplifier,
speakers
and TV monitor)
memo