Pioneer VSX-45TX Owner's Manual - Page 33

PREPARATION PREPARATION Display All the display information is explained and/or referenced here. 1 2 3 4 56 SIGNAL PRO LOGIC Neo :6 AUTO DIGITAL RF DTS ES EX DIGITAL MPEG AAC ANALOG STEREO SB CH AUTO ON OFF DSP MOVIE MUSIC L C R LFE LS S RS SP A B LOUDNESS MIDNIGHT TONE DNR ATT Displays & Controls 7 STEREO MONO TUNED RF ATT dB RDS EON Hi-BIT/ SAMPLING MULTI-ROOM 13 12 11 10 9 8 1 SIGNAL SELECT indicators Light to indicate the input signal you selected. AUTO: Lights when the receiver is set to select the input signal automatically. DIGITAL: Lights when digital audio signals are selected. ANALOG: Lights when analog signals are selected. 2 Digital format indicators PRO LOGIC II: Lights during Dolby Pro Logic II processing. NEO:6: Lights during NEO:6 processing. 2 DIGITAL: Lights when a Dolby Digital signal is detected. DTS: Lights when a DTS signal is detected. ES: Lights when playing back a DTS ES signal. EX: Lights when playing back a Dolby Digital EX signal. STEREO: Lights during two-channel playback. 3 LOUDNESS indicator Lights when LOUDNESS is on. 4 MIDNIGHT indicator Lights when MIDNIGHT is on. 5 TONE indicator Lights when the TONE control is on. 6 DNR indicator Lights when DIGITAL NR is on. 7 TUNER indicators STEREO: Lights when an FM stereo broadcast is received in the auto stereo mode. MONO: Lights when the tuner is set to receive FM broadcasts and when MPX mode is selected. TUNED: Lights when a broadcast is received. 8 Volume level indicator 9 MULTI ROOM indicator Lights when the MULTI ROOM system is on. 10 Hi-BIT/SAMPLING indicator Lights when a HI-BIT/SAMPLING mode is on. 11 DSP indicators MOVIE: Lights when a MOVIE mode is selected. When a DSP MOVIE mode is selected DSP will light with a box around it. MUSIC: Lights when a MUSIC mode is selected. When a DSP MUSIC mode is selected DSP will light with a box around it. 12 Program Format indicators For Dolby Digital or DTS sources: These indicators change according to which channels are active in the source. When all three LS (left surround), S (surround) and RS (right surround) light at the same time it means a source with a 6.1 channel playback flag is being used. L - Left front channel. C - Center channel. R - Right front channel. LS - Left surround channel. S - Surround channel or Surround back channel. RS - Right surround channel. LFE - Low Frequency Effects channel. ‡ - Lights when LFE signal is input. 13 SB CH indicators Light to indicate the status of the surround back channels. AUTO - Lights when the SB CH MODE or VIRTUAL SURROUND BACK mode is set to AUTO. ON - Lights when the SB CH MODE or VIRTUAL SURROUND BACK mode is set to ON. OFF - Lights when the SB CH MODE or VIRTUAL SURROUND BACK mode is set to OFF. 33