Samsung SCH-R430 User Manual (user Manual) (ver.f2) (English) - Page 92
Voice Settings - factory reset
View all Samsung SCH-R430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
3. Wait for the beep and say the digits using your normal tone of voice. After a moment, the phone plays back the recording and prompts "Did the recording sound ok?" • If the recording was good, say "Yes." • If you need to re-record, say "No." If you say "No," the phone prompts you to pronounce the digits again. Wait for the beep and then say the digits. Repeat this step until you're satisfied with the recording. 4. After confirming that the recording sounds "ok", continue the recording process with the next set of digits. 5. After 10 sets of digits, "Adaptation complete" plays through the speaker and you are returned to the Digit Dialing menu. Reset Digits To reset digit dialing to factory default settings, do the following: 1. From the Voice Service menu, select Voice Settings ➔ Digit Dialing. The following options appear in the display: • Adapt Digits • Reset Digits 89 2. Select Reset Digits. The phone prompts you to confirm digit adaptation rest. Press OK ( ) to reset your digit adaptation, or press Back ( ) to cancel and retain your digit adaptation. Sound Sound lets you specify what (if any) text prompts you want your phone to read to you through the earpiece. 1. From the Voice Service menu, select Voice Settings ➔ Sound. The following options appear in the display: • Prompts - Enables or disables audio prompts. • Digits - Enables or disables audio digit playback. • Names - Enables or disables audio name playback. • Name Settings - Lets you adjust the speed and volume of your phone's audio name playback. 2. Highlight the desired setting. 3. Press to accept the new setting. Voice Launch To set the key or action that launches VoiceSignal, do the following: 1. From the Voice Service menu, select Voice Settings ➔ Voice Launch. The following options appear in the display: