Sanyo PDG-DHT8000L RS232C Expand - Page 21
Functional Execution Command, Format, Transfer Example, Operation Requirements
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
PDG-DHT8000L Expand Serial Command Functional Specifications 8 Functional Execution Command 8.1 Format 1) PC issues a command in the format below: Pattern1: "CF_Command" [CR] Pattern2: "CF_Command_" %1 [CR] CF_: Header Command: String %1: Parameter (String) _: Space (To separate Command and Parameter) 2) The projector decodes the received command and when it gets ready to receive another command, it returns the response. "000" [CR]: (0x06, 0x0D) When receiving Functional Execution Command "nnn" [CR]: Except "000", when it cannot execute commands for any specific reason. For detail, refer to [7. Error Code Table] "?" [CR]: When the received data cannot be decoded 8.2 Transfer Example When setting projector's total dots to 1344 by Expand Command. PC → PJ: "CF_TDOTS_1344" [CR] PC ← PJ: "000" [CR Acceptable 8.3 Operation Requirements When the projector status is in the status below, Functional Execution Commands are limited (Status Read Commands are available in following status) Projector Status Available Functional Execution Command In Standby status C00: POWER ON Count Down in process C00: POWER ON (Countdown is terminated) Cooling Down in process NONE (No Execution) Cooling Down in process abnormal temperature due to NONE (No Execution) In Abnormal Temperature NONE (No Execution) Power Failure (60 seconds after Power failed) NONE (No Execution) Power Saving Cooling Down in process NONE (No Execution) In Power Saving status C00: POWER ON C01: POWER OFF Note) An appropriate error code is returned when the projector receives other command in the above status. 21/101