Sanyo PDG-DHT8000L RS232C Expand - Page 84

PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.15 CR_PJLOCKNOW Command Command "CR_PJLOCKNOW" [CR] Details Get actual setting status of PIN code lock Acceptable "000_%1" [CR] "LOCK" ------ PJ is locked PIN code lock is set to ON1/ON2 on the menu and PJ PIN code is not entered, therefore PJ is actually locked. Response %1 "FREE" ------- PJ is unlocked (either A or B) A) PJ lock is set to OFF on the menu B) PJ lock is set to ON1/ON2 on the menu, but PIN code Lock mode is canceled because PJ PIN code is entered. Unacceptable "Error Code" [CR] 9.10.16 CR_PJLOCMENU Command Command "CR_PJLOCKMENU" [CR] Details Get ON/OFF setting status of PIN code lock on menu Acceptable "000_%1" [CR] "ON1 PIN code lock ON 1 is set on the menu Response %1 "ON2 PIN code lock ON 2 is set on the menu "OFF PIN code lock OFF is set on the menu Unacceptable "Error Code" [CR] 9.10.17 CR_FILH Command Command "CR_FILH" [CR] Details Get Filter used time Acceptable Response %1 "000_%1" [CR] "00000 - 99999" Unacceptable "Error Code" [CR] 9.10.18 CR_FILCOND Command Command "CR_FILCOND" [CR] Details Get status of filter clog Acceptable "000_%1" [CR] "CLOG" = Filter is clogged Response %1 "WARN" = Filter is nearly clogged "CLEAN" = Filter is not clogged Unacceptable "Error Code" [CR] 9.10.19 CR_FILREPL Command Command "CR_FILREPL" [CR] Details Get status of Filter cleaning / replacement time Acceptable "000_%1" [CR] Response %1 "1Y"-------Filter Exchange time is over value of Filter Message. "1N"--Filter Exchange time is not over value of Filter Message. Unacceptable "Error Code" [CR] 84/101