Sanyo PDG-DHT8000L RS232C Expand - Page 67

PDG-DHT8000L Expand Serial Command Functional Specifications 9.5.9 CR_ORGMODE Command Command "CR_ORGMODE" [CR] Details Get the original signal of current selected Mode that is set in PC Adj. When MODE1- 10 or EXT11-60 is not selected, get the current signal. Acceptable "000_%1" [CR] When input signal is PC Analog; "VGA1 Indicates signal Is VGA1 "VGA2 Indicates signal is VGA2 : : "XGA1 Indicates signal is XGA1 : : "WXGA3 Indicates signal is WXGA3 "1080i60 Indicates signal is 1080i60 "1080i50 Indicates signal is 1080i50 "1035i Indicates signal is 10350i "720p60 Indicates signal is 720p60 "720p50 Indicates signal is 720p50 "575p Indicates signal is 575p Response %1 "480p Indicates signal is 480p "575i Indicates signal is 575i "480i Indicates signal is 480i "1080psf/24 Indicates signal is 1080psf/24 "1080psf/25 Indicates signal is 1080psf/25 "1080psf/30 Indicates signal is 1080psf/30 "1080p24 Indicates signal is 1080p24 "1080p25 Indicates signal is 1080p25 "1080p30 Indicates signal is 1080p30 "1080p50 Indicates signal is 1080p50 "1080p60 Indicates signal is 1080p60 Note; To differentiate between 60Hz and 50Hz in 1080i and 720p, "60" or "50" is necessary to add to the parameter in this command * When input signal is not PC Analog, error code "101" is returned. Unacceptable "?" [CR] 9.5.10 CR_PCSTORE Command Command "CR_PCSTORE" [CR] Details Get Free or Stored status of MODE1 - 5 in PC Adjust. Data consists of 10 bytes and each byte represents MODE1-10.(F:Free, S:Stored) Acceptable "000_%1" [CR] "FFFFFFFFFF ALL Free "SFFFFFFFFF Mode1 is Stored, others are Free %1 : Response "FFFFFFFFFS Mode10 is Stored, others are Free "SSSSSSSSSS ALL Stored "Error Code" [CR When command is invalid in the Unacceptable given condition (such as being selected input) "?" [CR] --------- When unknown command is received 67/101