Sanyo PDG-DHT8000L RS232C Expand - Page 44
CF_BLENDBLK Command, 9.20 CF_BLENDBLKALL Command, 9.21 CF_BLENDTESTPAT Command, 9.22
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.19 CF_BLENDBLK Command Command "CF_BLENDBLK_%1_%2" [CR] "R Red %1 "G Green "B Blue %2 "-127" ~ "0127 Directly specify value of color of %1 Details Set value of color specified by Edge blending %1. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.20 CF_BLENDBLKALL Command Command "CF_BLENDBLKALL_%1" [CR] %1 "UP Increment value of Black level(R/G/B) by 1 "DN Decrement value of Black level(R/G/B) by 1 Details Set value of all of Black level of Edge blending. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.21 CF_BLENDTESTPAT Command Command "CF_BLENDTESTPAT_%1" [CR] %1 "ON Set to On "OFF Set to Off Details Set Test pattern of Edge blending.(Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.22 CF_BLENDRST Command Command "CF_BLENDRST_%1" [CR] %1 "RST Reset current setting status Details Reset current setting status of Edge blending. (Available only in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 44/101