Sanyo PDG-DHT8000L RS232C Expand - Page 94
CR_DYNAMICBLACK Command, 10.54 CR_HDMISETUP Command
![]() |
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.53 CR_DYNAMICBLACK Command Command "CR_DYNAMICBLACK" [CR] Details Get setting status of DynamicBlack Acceptable "000_%1" [CR] "OFF Off is selected Response %1 "LOW Low is selected "HIGH High is selected Unacceptable "Error Code" [CR] 9.10.54 CR_HDMISETUP Command Command "CR_HDMISETUP" [CR] Details Get setting status of HDMI setup Acceptable "000_%1" [CR] Response %1 "NORMAL Normal is selected "ENHANCED Enhanced is selected Unacceptable "Error Code" [CR] 94/101
![](/manual_guide/products/sanyo-pdgdht8000l-rs232c-expand-3796ec4/94.png)
PDG-DHT8000L
Expand Serial Command Functional Specifications
94/101
9.10.53 CR_DYNAMICBLACK Command
Command
“CR_DYNAMICBLACK” [CR]
Details
Get setting status of DynamicBlack
Acceptable
“000_%1” [CR]
%1
“OFF” ---------------------- Off is selected
“LOW” --------------------- Low is selected
“HIGH” -------------------- High is selected
Response
Unacceptable
“Error Code” [CR]
9.10.54 CR_HDMISETUP Command
Command
“CR_HDMISETUP” [CR]
Details
Get setting status of HDMI setup
Acceptable
“000_%1” [CR]
%1
“NORMAL” ---------------------- Normal is selected
“ENHANCED” ------------------ Enhanced is selected
Response
Unacceptable
“Error Code” [CR]