Sanyo PDG-DHT8000L RS232C Expand - Page 95
Other Status Read Commands, 11.1 CR_STATUS Command, 11.2 CR_SIGNAL Command, 11.3 CR_VMUTE Command,
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
PDG-DHT8000L Expand Serial Command Functional Specifications 9.11 Other Status Read Commands 9.11.1 CR_STATUS Command Command "CR_STATUS" [CR] Details Get operating status of Projector Same as "CR0" in basic command except error code follows it. Acceptable "000_%1" [CR] "00" = Power ON "80" = Standby "40" = Countdown in process "20" = Cooling Down in process "10" = Power Failure "28" = Cooling Down in process due to abnormal temperature "88" =Standby after Cooling Down due to abnormal temperature Response %1 "02" = Invalid RS-232C Command "24" = Power Save/Cooling Down in process "04" = Power Save "21" = Cooling Down in process after turned off due to lamp failure "81" Standby after Cooling Down due to lamp failure "2C" = Cooling Down in process after Power Off due to Shutter management "8C" = Standby after Cooling Down due to Shutter management Unacceptable "Error Code" [CR] 9.11.2 CR_SIGNAL Command Command "CR_SIGNAL" [CR] Details Get status if there is any signal or not Acceptable "000_%1" [CR] Response %1 "ON There is signal "OFF There is no signal Unacceptable "?" [CR] 9.11.3 CR_VMUTE Command Command "CR_VMUTE" [CR] Details Get Video mute setting status Acceptable "000_%1" [CR] Response %1 "ON Video mute is set to ON (Shutter Close). "OFF Video mute is set to OFF (Shutter Open). Unacceptable "?" [CR] 9.11.4 CR_FREEZE Command Command "CR_FREEZE" [CR] Details Get Freeze setting status Acceptable "000_%1" [CR] Response %1 "ON Freeze is set to ON. "OFF Freeze is set to OFF. Unacceptable "?" [CR] 95/101