Sanyo PDG-DHT8000L RS232C Expand - Page 79
CR_INFLAMP Command, 9.6 CR_PROJH Command, 9.7 CR_HMLAMP Command, 9.8 CR_LAMPH Command
![]() |
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
PDG-DHT8000L Expand Serial Command Functional Specifications 9.9.5 CR_INFLAMP Command Command "CR_INFLAMP" [CR] Details Get Lamp mode switching status Acceptable "000_%1" [CR] Response %1 "NML" --------- in Normal status (lamp switching operation is not active.) Unacceptable "?" [CR] 9.9.6 CR_PROJH Command Command "CR_PROJH" [CR] Details Get total running time of projector (in hours) Acceptable "000_%1" [CR] Response %1 "0000000" - "0099999" Unacceptable "?" [CR] 9.9.7 CR_HMLAMP Command Command "CR_HMLAMP" [CR] Details Get total lamp number Acceptable "000_%1" [CR] Response %1 "002" Unacceptable "?" [CR] 9.9.8 CR_LAMPH Command Command "CR_LAMPH" [CR] Details Get Lamp running time (in hours) * return actual lamp running time Acceptable "000_%1_%2_%3_%4" [CR] Lamp 1 data comes first, and then one space, after that lamp 2 data is followed. %1 = lamp No.1 %2 = lamp No.2 %3 = lamp No.3 %4 = lamp No.4 Response %1_%2 %3_%4 In the case of 2-lamps model, % 1 and % 2 are only used There are no % 3 and % 4 e.g.; "00410_00410_00410_00410" [CR Lamp No.1 = 410 Hours Lamp No.2 = 410 Hours Lamp No.3 = 410 Hours Lamp No.4 = 410 Hours Unacceptable "?" [CR] 79/101
![](/manual_guide/products/sanyo-pdgdht8000l-rs232c-expand-3796ec4/79.png)