Sanyo PDG-DHT8000L RS232C Expand - Page 40
CF_PIPMODE Command, 9.9 CF_PIPMAININP Command
![]() |
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.8 CF_PIPMODE Command Command "CF_PIPMODE_%1" [CR] %1 "PINP Select P in P mode "PBYP Select P by P mode Details Set mode of "Picture in Picture". (Available only in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.9 CF_PIPMAININP Command Command "CF_PIPMAININP_%1_%2" [CR] "1 Select Input 1 %1 "2 Select Input 2 "3 Select Input 3 "4 Select Input 4 "DIGITAL Select DVI Input "ANALOG Select Analog Input "VIDEO Select Composite Video Input "S-VIDEO Select S-Video input "YPBPR Select Y/Pb/Pr Input %2 "YCBCR Select Y/Cb/Cr Input "SDI1 Select SDI 1 Input "SDI2 Select SDI 2 Input "SCART Select SCART Input "HDCP Select HDCP Input "HDMI Select HDMI Input Details Select input and source of Main picture of "Picture in Picture". (Valid only when in the normal Power ON status.) * In the case of a specific status, return Error Code "101" [CR] and the command is not executed. - When selected Source does not meet the requirement for Input - When transmitted command of the input without inserting Board in Input3 or Input4 - When selected Input / Source which was impossible of choice by limit of Picture in Picture Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 40/101
![](/manual_guide/products/sanyo-pdgdht8000l-rs232c-expand-3796ec4/40.png)