Sanyo PDG-DHT8000L RS232C Expand - Page 62
CR_OFFSET-B Command, 4.13 CR_SHARP Command, 4.14 CR_GAMMA Command, 4.15 CR_NZRED Command, 4.16
![]() |
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
PDG-DHT8000L Expand Serial Command Functional Specifications 9.4.12 CR_OFFSET-B Command Command "CR_OFFSET-B" [CR] Details Get user controlled Blue value of Offset Acceptable Response %1 "000_%1" [CR] "000" - "063" Unacceptable "?" [CR] 9.4.13 CR_SHARP Command Command "CR_SHARP" [CR] Details Get user controlled value of Sharpness Acceptable "000_%1" [CR] Response %1 "000" - "031" Unacceptable "?" [CR] 9.4.14 CR_GAMMA Command Command "CR_GAMMA" [CR] Details Get user controlled value of Gamma Acceptable "000_%1" [CR] Response %1 "000" - "015" Unacceptable "?" [CR] 9.4.15 CR_NZRED Command Command "CR_NZRED" [CR] Details Get Noise Reduction setting status Acceptable "000_%1" [CR] Response %1 Unacceptable "ON Noise Reduction is ON "OFF Noise Reduction is OFF "Error Code" [CR When command is invalid in the given condition (such as being selected input) "?" [CR] --------- When unknown command is received 9.4.16 CR_PROGV Command Command "CR_PROGV" [CR] Details Get Progressive scan setting status Acceptable "000_%1" [CR] "ON Set Progressive scan On %1 "FILM Select FILM mode Response "OFF Set Progressive scan Off "Error Code" [CR When command is invalid in the given Unacceptable condition (such as being selected input) "?" [CR] --------- When unknown command is received 62/101
![](/manual_guide/products/sanyo-pdgdht8000l-rs232c-expand-3796ec4/62.png)