Sanyo PDG-DHT8000L RS232C Expand - Page 24
CF_WBAL- Command, 4.10 CF_OFFSET- Command, 4.11 CF_SHARP Command
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
PDG-DHT8000L Expand Serial Command Functional Specifications 8.4.9 CF_WBAL- Command Command "CF_WBAL-%1_%2" [CR] "R RED %1 "G GREEN "B BLUE "000-063"------ Directly specify value of Color selected in %1 of White Balance. "UP Increment setting value of Color specified in %1 of White Balance %2 by 1 "DN Decrement setting value of Color specified in %1 of White Balance by 1 Details Set value of Color specified in %1 of White Balance (Available only in the normal Power ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.10 CF_OFFSET- Command Command "CF_OFFSET-%1_%2" [CR] "R" --------- RED %1 "G" --------- GREEN "B" --------- BLUE "000-063"------ Directly specify value of Color selected in %1 of Offset. %2 "UP Increment setting value of Color specified in %1 of Offset by 1 "DN Decrement setting value of Color specified in %1 of Offset by 1 Details Set value of Color specified in %1 of Offset (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response "000" [CR] Unacceptable "Error Code"[CR] 8.4.11 CF_SHARP Command Command "CF_SHARP_%1" [CR] "000-031 Directly specify setting value of Sharpness. %1 "UP Increment setting value of Sharpness by 1 "DN Decrement setting value of Sharpness by 1 Details Set user controlled value of Sharpness. (Available only in the normal Power ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response Unacceptable "000" [CR] "Error Code" [CR] 24/101