Sanyo PDG-DHT8000L RS232C Expand - Page 55
CF_SHUTRELEASE Command, 9.60 CF_DELAYCTRL Command, 9.61 CF_CCAPTIONDISP Command
![]() |
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.59 CF_SHUTRELEASE Command Command "CF_SHUTRELEASE_%1" [CR] %1 "ANY"----------Enable to release Shutter with any key "SHUTTER Enable to release Shutter with only "SHUTTER" key Details Set Release key of Shutter. (Valid only when in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.60 CF_DELAYCTRL Command Command "CF_DELAYCTRL_%1" [CR] "OFF"---------- Set Video delay control to OFF %1 "LOW"---------- Set Video delay control to LOW "MID Set Video delay control to MID "HIGH"---------- Set Video delay control to HIGH Details Select the mode of Video delay control (Valid only when in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.61 CF_CCAPTIONDISP Command Command "CF_CCAPTIONDISP_%1" [CR] "OFF Select Off "CC1 Select CC1 %1 "CC2 Select CC2 "CC3 Select CC3 "CC4 Select CC4 Details Select channel of Closed caption. The status set with this command is stored in EEPROM and its setting is effective even after ALL is OFF. This command is available in normal Power ON status. Note)Closed caption is available under conditions below; Entered signal is appropriate (Video, NTSC signal of S-video) and System is fixed to NTSC. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 55/101
![](/manual_guide/products/sanyo-pdgdht8000l-rs232c-expand-3796ec4/55.png)