Sanyo PDG-DHT8000L RS232C Expand - Page 80
CR_LAMPCORRESPH Command, 9.10 CR_LAMPINTERVAL Command, 9.11 CR_LAMPLIFECONTRL Command
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
PDG-DHT8000L Expand Serial Command Functional Specifications 9.9.9 CR_LAMPCORRESPH Command Command "CR_LAMPCORRESPH" [CR] Details Get Lamp running time (in hours) *return lamp running time multiplied by a coefficient (not actual running time) Acceptable Response %1 "000_%1" [CR] "00000"-"99999" Unacceptable "Error Code" [CR] 9.9.10 CR_LAMPINTERVAL Command Command "CR_LAMPINTERVAL" [CR] Details Get setting status of Lamp interval Acceptable "000_%1" [CR] "AUTO Auto is selected "0024 24 Hours is selected Response %1 "0200 200 Hours is selected "0500 500 Hours is selected "1000 1000 Hours is selected "2000 2000 Hours is selected "OFF Off is selected Unacceptable "?" [CR] 9.9.11 CR_LAMPLIFECONTRL Command Command "CR_LAMPLIFECONTRL" [CR] Details Get setting status of Lamp life control. (Available only in the normal Power ON status) Acceptable "000_%1" [CR] Response %1 "MODE1 Mode1 is selected "MODE2 Mode2 is selected Unacceptable "Error Code" [CR] 80/101