Sanyo PDG-DHT8000L RS232C Expand - Page 34
CF_KEYSTONE Command, 7.4 CF_KEYSTONEMODE Command, 7.5 CF_CEIL Command
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
PDG-DHT8000L Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command "CF_KEYSTONE _%1" [CR] "UP Correct Keystone distortion to reduce upper part of image "FUP Correct Keystone distortion to reduce upper part "DN Correct Keystone distortion to reduce lower part of image "FDN Correct Keystone distortion to reduce lower part largely %1 "LEFT Correct Keystone distortion to reduce left part of image "FLFT Correct Keystone distortion to reduce left part largely "RIGHT" -------- Correct Keystone distortion to reduce right part of image "FRGT" --------- Correct Keystone distortion to reduce right part largely "RST Set Keystone OFF Details Change level of Keystone distortion correction (Available only in the normal Power ON status). When reached the limit of the correction level, projector accepts the command but does not execute it. Receiving this command immediately invokes the operation. When trying to set the value beyond available range, error code "201" is returned and the operation is not executed. Example 1: When the correction level of the right part has reached its upper limit and then the command "RIGHT" is received Example 2: When the upper part correction allows only another step, and then the command "FUP" is received. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.7.4 CF_KEYSTONEMODE Command Command "CF_KYSTNMODE _%1" [CR] %1 "STR" --------- Set Keystone store mode to Store "RST" --------- Set Keystone store mode to Reset Details Set Keystone store mode (Available only in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.7.5 CF_CEIL Command Command "CF_CEIL_%1" [CR] %1 "ON Set Ceiling to ON "OFF Set Ceiling to OFF Details Set/Cancel Ceiling. (Valid only when in the normal Power ON status.) When Ceiling is set to ON, image is left/right as well as top/bottom reversed. The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 34/101