Sharp 3800M Operation Manual - Page 107
Troubleshooting
View all Sharp 3800M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
9. TROUBLESHOOTING Troubleshooting Problem Check and Remedy Dialing cannot be done. Make sure that the telephone line is properly connected to both the machine and the wall jack. No transmission takes place. Make sure that the receiving machine has not run out of printing paper. Make sure that the receiving machine is G3 compatible. (This information should be included in the machine's originalation.) Check the display for possible error messages. Nothing is printed at the receiving end. Make sure that the original you are sending is fed into the machine in the correct way. Make sure that the receiving machine is in working order. A distorted image is received at the other end. Noise on the telephone line may 9 cause distortion. Try sending the original again. Make a copy of the original on the machine. If the copy is also distorted, the machine may have a problem. The received original is faint. Ask the other party to send higher contrast originals. If the contrast is still too low, make a copy with the machine to check it. Received images are distorted. Noise on the telephone line may cause distortion. Have the sending party send the original again. The drum cartridge may need replacement. COPY SERVICE ERROR The copier will not function. Turn the power switch off, remove the power cord from the outlet, and contact your SHARP dealer. FAX SERVICE ERROR (X) The fax will not function. Contact your SHARP dealer. Note: If your problem cannot be solved by carrying out the instructions in the Check and Remedy column above, please contact your SHARP dealer. TROUBLESHOOTING 97 SUK 09 TROUBLE LEO.P65 97 30/03/00, 17:31