Sharp 3800M Operation Manual - Page 29
left copy quantity key.
View all Sharp 3800M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Normal copying 5 Set the number of copies using the two copy quantity () key. Copying will stop and the number in the display will be reset to "0". • When the print ( ) key is pressed while printing is being performed, printing will be interrupted and copying will start. Printing will be resumed after copying is finished. Do not perform copying with the original cover open. MAKING COPIES 19 SUK 02 MAKING COPIES LEO.p65 19 30/03/00, 16:37
19
MAKING COPIES
2
Normal copying
5
Set the number of copies using the two copy quantity (
<
,
<
) keys.
•
Press the clear (
>
) key to clear an entry if a mistake is made.
•
A single copy can be made with the initial setting, i.e., when “0” is
displayed.
•
If copying onto special papers, feed one sheet at a time and leave
the copy quantity at 0.
•
Press the right copy quantity key to set the
unit digit from 0 to 9. This key will not change
the tens digit.
•
Press the left copy quantity key to set the
tens digit from 1 to 5. Up to 50 copies can be
set.
Tens digit
Unit digit
Press the print (
) key.
6
•
To display the number of copies made in a continuous run, press the
left copy quantity key.
•
To stop copying in the middle of a run, press the clear (
>
) key.
Copying will stop and the number in the display will be reset to “0”.
•
When the print (
) key is pressed while printing is being performed,
printing will be interrupted and copying will start. Printing will be
resumed after copying is finished.
Do not perform copying with the original cover open.
SUK 02 MAKING COPIES LEO.p65
30/03/00, 16:37
19