Sharp 3800M Operation Manual - Page 131

Using other installed drivers If you use another GDI printer or a Windows Printing System printer, including the SHARP AL-800 series and AL-1000 series, interference between printers may occur and printing may not be performed properly. To use another GDI printer or a Windows Printing System printer, you must change the port setting of the printer driver using the following procedure. If another printer does not operate properly when the AL-F_FO printer driver is set to "FILE", uninstall the AL-F_FO printer driver. To uninstall the driver, see UNINSTALLING PRINTER DRIVER on page 122. If after uninstalling the AL-F_FO printer driver, the printer still does not operate properly, reinstall the printer driver you are using. Windows 95/Windows 98/Windows NT 4.0: 1 Click the Start button. 2 Select Settings and then click Printers. 3 Right-click the SHARP AL-F_FO icon in the printer dialog box and then click Properties. For this description, it is assumed that the mouse is configured for right hand operation. 4 13 Click the Details tab (Ports tab - on Windows NT4.0) in the Properties dialog box, select FILE: in the Print to the following port list box, and click the OK button. 5 Right-click the icon of the printer to be used and click Properties. 6 Click the Details tab (Ports tab - on Windows NT4.0) in the Properties window, select LPT1 (or the currently used port), and click the OK button. To use the AL-F_FO again, perform the same procedure but select the port to be used (for example, LPT1) in step 4. TROUBLE? 121 UK 13 TROUBLE LEO.p65 121 30/03/00, 17:42