Sharp 3800M Operation Manual - Page 55
Adjusting the Ringing Volume, Setting the Length of Alarm Beeps
View all Sharp 3800M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Adjusting the Ringing Volume Adjust the ringing volume of the machine using the procedure below. Factory setting: 3 (MEDIUM) Step 1 Press these keys GHI FUNCTION 2 PQRS Comments "OPTION SETTING" will appear in the display. "RINGING VOLUME" will appear in the display. 3 or 4 ENTER 5 STOP STOP Press the or key to lower or raise the volume to the desired level. 6 "STORED" will appear in the display. Press the STOP key twice to exit. Setting the Length of Alarm Beeps You can select the length in seconds of the alarm beeps following the procedure below. Factory setting: 1 (3SEC) Step Press these keys Comments 1 FUNCTION GHI "OPTION SETTING" will appear in the display. 2 GHI "BEEP LENGTH" will appear in the display. 3 or Press the or key to set the alarm beeps to the desired length or to turn them off. 4 ENTER "STORED" will appear in the display. 5 STOP STOP Press the STOP key twice to exit. INITIAL SETTINGS 45 SUK 06 INITIAL LEO.p65 45 30/03/00, 17:00