Sharp 3800M Operation Manual - Page 39
Supplies And User Maintenance
![]() |
View all Sharp 3800M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4. SUPPLIES AND USER MAINTENANCE TD cartridge replacement Be sure to use only genuine SHARP parts and supplies. The TD cartridge replacement required (s) indicator will light up when toner is needed. For more information on purchasing the TD cartridge, see SUPPLY LIST on page 128. If copying is continued while the (s) indicator is lit, copies will gradually become lighter until the copier stops and the indicator begins blinking. Replace the old TD cartridge by following the procedure given below. 4 • After the copier stops, it may be possible to make a few more copies by taking theTD cartridge out of the copier, shaking it horizontally, then reinstalling it. If copying is not possible after this operation, replace the TD cartridge. • If the indicator begins to blikn while facsimile data is being received, the data will not beprinted and will be stored in memory. After the TD cartridge is replaced,the data that has been storedin memory will be automatically printed. Do not turn off the machinepower when replacing the TD cartridge.Doing so will clear any facsimile or print data that has been stored in memory. 1 Push gently on both sides of the front cover to open the cover. 2 Gently pull the TD cartridge handle out by inserting your fingers into the groove at the center of the handle. SUPPLIES AND USER MAINTENANCE 29 SUK 04 SUPPLIES AND USER MAINTENANCE29LEO.p65 27/03/00, 15:25
![](/manual_guide/products/sharp-3800m-operation-manual-9762d91/39.png)