Sharp 3800M Operation Manual - Page 23
Power to machine
View all Sharp 3800M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Side to be printed Loading copy paper Paper support Paper guide 1 1 4 Make sure the paper release lever is pushed back. The paper will be clamped by the paper feed roller inside the copier. When placing special paper or several sheets of paper or when making two-sided copies, the paper may not be clamped inside the machine even if the paper release lever is pushed back. In this case, repeat the paper release lever operation several times to make sure that the paper is clamped. Power to machine 1 Ensure that the power switch of the machine is in the OFF position.Insert the attached power cord into the power cord socket at the rear of the machine. If you use the machine in a country other than the country where the copier was purchased, you will need to make sure that your local power supply is compatible with your model. If you plug the machine into an incompatible power supply, irreparable damage to the machine will result. 2 Plug the other end of the power cord into the nearest outlet. Only insert the power cord into a properly grounded wall socket. Do not use extension cord or multi-way power distribution boards. INSTALLATION 13 SUK 01 INSTALLATION LEO.p65 13 30/03/00, 17:45