Sharp 3800M Operation Manual - Page 99
Timer Operations
View all Sharp 3800M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Special Functions Timer Operations The timer function allows you to set a transmission or polling operation to be performed automatically at a time you specify. Up to three transmission operations or polling operations can be set at any one time, and the times they will be performed can be specified up to a week in advance. Note: You can use this function only when you send the document from the SPF. You can use this function, for example, to take advantage of lower nighttime telephone rates without having to be there when the operation is performed. • For a timer transmission, scan the original into memory when you set the transmission. Scanning the original into memory is convenient because you do not have to worry about original mix-ups or forgetting to load the original. • If the memory becomes full while the original is being scanned, "MEMORY FULL" will appear in the display. • Press the FAX START key to transmit the pages that have been stored up to that point in memory. • Press the STOP key to cancel the entire transmission. 8 Note: In Reverse Sending mode, you must press the STOP key to cancel the entire transmission when "MEMORY FULL" appears in the display. • Code numbers are used to specify each day of the week. Refer to the table below when making time settings which include a specified day. Day Sunday Monday Tuesday Wednesday Thursday Friday Saturday Code 0 1 2 3 4 5 6 HOW TO USE THE FAX FUNCTION 89 SUK 08 USING FAX LEO.p65 89 30/03/00, 17:25