Sharp MX-M350N Fax Guide - Page 21
Loading A Document
View all Sharp MX-M350N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
LOADING A DOCUMENT A document can be loaded in the automatic document feeder or on the document glass. Use the automatic document feeder when faxing a large number of sheet originals. Use the document glass to fax originals that cannot be scanned using the automatic document feeder such as thick or thin sheet originals or bound originals such as books. USING THE AUTOMATIC DOCUMENT FEEDER 1 Lift the document glass cover and make sure a document is not placed on the document glass. Gently close the cover. 2 Adjust the document guides on the automatic document feeder to the width of the document. 3 1 Align the edges of the document pages and then insert the stack in the document feeder so that the first page is face down. Insert the stack into the automatic document feeder until it stops. The stack should not be higher than the indicator line (maximum 50 pages, or 30 pages for 8-1/2"x14" or larger documents). NOTES Use the automatic document feeder for long originals. The document glass cannot be used. When faxing a long original, touch the [LONG SIZE] key in step 3 of "MANUALLY SETTING THE SCANNING SIZE" (page 1-8). USING THE DOCUMENT GLASS 1 Open the document glass cover, and place the document face down on the document glass. Gently close the cover. Regardless of the size of the original, place the original in the far left corner of the document glass. (Align the upper left-hand corner of the original with the tip of the mark.) Document glass scale mark Document glass scale mark Original size detector A5 B5 A4 B4 A3 B5R A4R NOTE Do not place any objects under the original size detector plate. Closing the document glass cover with an object underneath may damage the original size detector plate and prevent correct detection of the document size. Downloaded From ManualsPrinter.com Manuals 1-7