Sony CCD-V8 Operating Instructions - Page 29
i4litioufAilidlOtitio, Alicks, vniAthaiirfripto, sereot
View all Sony CCD-V8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
R-2 a UHF ACP-80UC VHF z 0 FU430UC 4/ AUDIONIDEO IN Recording *I Turn on the power of the equipment. 2 Set the selector switch of the ANS-34 anten- na selector to VTR. 3 Insert the cassette into the CCD-V8.4 Select the channel to be recorded with the channel select button on the VTR and set the channel of the TV for the CCD-V8. 5 Slide the • switch of the CCD-V8. Recording will start. Playback 1 Turn on the power of the CCD-V8 and the TV. 2 Set the selector switch of the ANS-34 anten- na selector to VTR. 3 Select the channel for the video camera recorder on the TV. 4 Insert the cassette into the CCD-V8 and press the 0. button. Playback will start. Recording one TV program while viewing another 1 Set the TV/VTR select button on the VTR to TV and the selector switch of the ANS-34 to ANT. 2 Select the desired channel on the TV. AUDIONIDEO OUT 1 VMC-607M AUDIO/ 44 44 AUDIONIDEO IN VIDEO . VHF OUT IN UHF UHF OUT VHF OUT IN 2 03000604a Ty:i4litioufAilidlOtitio input iAi licks:alio* vniAthaiirfripto sereot sWitch 1 Connect the VHF/UHF antenna cables to the VHF/UHF IN terminals of the VTR. 2 Connect the VHF/UHF OUT terminals of the VTR to the VHF/UHF terminals of the TV with the proper antenna cables. - 3 Connect the audio/video output jacks of the VTR to the AUDIONIDEO IN jacks of the RFU-80UC with the optional VMC-607M audio video cable. 4 Connect the AUDI0NIDEO OUT Jacks of RFU-80UC to the audio/video input jacks of the VTR with an optional VMC-607M audio video cable. 5 Connect all the ac power cords to the ac outlets. • Set the VHF/LINE selector of the RFU-80UC to LINE. • Set the RF UNIT selector of the VTR to either VHF channel 3 or 4 which is not active in your area. 29