Sony CCD-V8 Operating Instructions - Page 9
NI VPA0
View all Sony CCD-V8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
NP-22 ACP-80UC IS To Insert and remove the battery pack I Oa insert the battery Into the battery holder with the metal contacts facing the inside. To remove the battery pack, push the bottom of the battery pack and hold it. At the same time slide the ejector In the direction of the arrow and slide the battery pack out. AFTER EACH USE, BE SURE TO RECHARGE THE BATTERY PACK. AC PA0( E Connection Insert the ACP-SOUC ac pack into the battery holder with the metal contacts facing the inside. 2 Connect the ac power cord of the ac pack to the ac outlet. AY El Connect the DCC-16AW car battery cord to the DC IN jack of the DCP-80 dc pack and to the cigarette lighter (12 V or 24 V) socket of a car and Insert the dc pack into the video camera recorder. To remove the dc pack, push the dc pack in and at the same time slide the ejector in the direction of the arrow. The dc pack will then slide out. Note on power source If power source is disconnected or the battery/ac pack is removed during recording or play back, the tape may be damaged, unless power is supplied again soon. DCG-16AW DCP-80 9