Sony DCR SR100 Operating Guide - Page 18

Step 2: Charging the battery pack (continued) Playback time Approximate time (min.) available when you use a fully charged battery pack. Battery pack NP-FP50 NP-FP60 (supplied) NP-FP70 NP-FP71 NP-FP90 LCD screen LCD screen opened* closed 105 125 160 190 225 265 270 315 400 475 * When the LCD backlight turns on. On the battery pack • Before changing the battery pack, slide the POWER switch to OFF (CHG). • The CHG (charge) lamp flashes during charging, or BATTERY INFO (p.37) will not be correctly displayed under the following conditions. - The battery pack is not attached correctly. - The battery pack is damaged. - The battery pack is fully discharged. (For BATTERY INFO only.) • The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder, even when the power cord is removed from the wall outlet. • We recommend that you use an NP-FP70, NPFP71 or NP-FP90 battery pack when a video light (optional) is attached. On the charging/recording/playback time • Times measured with the camcorder at 25 °C (77°F). (10-30°C (50-86°F) is recommended.) • Available recording and playback time will be shorter when you use your camcorder in low temperatures. • The available recording and playback time will be shorter depending on the conditions under which you use your camcorder. On the AC Adaptor • Connect the AC Adaptor to an easily accessible wall outlet close by. If any trouble occurs while using the adaptor, immediately shut off the power by removing the plug from the wall outlet. • Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. • Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction. PRECAUTION • Even if your camcorder is turned off, AC power (house current) is still supplied to it while connected to the wall outlet via the AC Adaptor. 18