Sony DCR SR100 Operating Guide - Page 37

Recording/Playback Recording/playback To check the remaining battery .... qf Set the POWER switch to OFF (CHG), then press DISP/BATT INFO qf. If you press this button once, BATTERY INFO appears on the screen for about seven seconds. Press the button while BATTERY INFO appears on the screen to extend the indication to the 20second maximum. BATTERY INFO BATTERY CHARGE LEVEL REC TIME AVAILABLE LCD SCREEN: 90 VIEWFINDER: 99 Remaining battery (approx.) Recording capacity (approx.) Check the available free hard disk space 6 See [HDD INFO] (p.59). • During recording, the remaining recordable time/ number of still images are displayed. To turn off the operation confirmation beep 6 See [BEEP] on page 64. To initialize the settings (Reset) ... qa Press RESET qa to initialize all the settings, including settings for date and time. (Setup items customized on Personal Menu are not initialized.) Other part names and functions 3 Built-in 4ch microphone When an external microphone (optional) is connected, it takes precedence over the internal microphone. 4 Remote sensor Point the Remote Commander (p.41) towards the remote sensor to operate your camcorder. 4 Recording lamp The recording lamp lights up in red during recording (p.63). The lamp flashes when the remaining capacity for the battery or the hard disk of the camcorder is running low. qd Speaker Sounds come out from the speaker while playing back. • For how to adjust the volume, see page 31. 37