Sony DCR SR100 Operating Guide - Page 63
DISPLAY, REMAINING, REMOTE CTRL Remote control, REC LAMP Recording lamp, Using the Setup items
UPC - 027242692251
View all Sony DCR SR100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
DATE/TIME 60min 1Date 2Time CAMERA DATA Movie 60min 00:00:00 JAN 1 2006 1:12:34 AM 00:00:00 AWB Still image 60min 10/10 3SteadyShot off 4 Exposure 5White balance 6 Gain 7Shutter speed 8Aperture value 9Exposure value • appears for an image recorded using a flash. • The data code is displayed on the TV screen, if you connect your camcorder to a TV. • The indicator toggles through the following sequences as you press DATA CODE on the Remote Commander: DATE/TIME t CAMERA DATA t OFF (no indication). • Depending on the hard disk condition of the camcorder, bars [--:--:--] appear. • The setting returns to [OFF] after you remove the power source for more than five minutes. DISPLAY You can select the number of thumbnails that appear on the VISUAL INDEX screen. Thumbnail Glossary (p.102) B ZOOM LINK Change the number of thumbnails (6 or 12) with the zoom lever on your camcorder.* 6IMAGES Displays thumbnails of 6 images. 12IMAGES Displays thumbnails of 12 images. * You can operate with the zoom buttons on the LCD frame or on the Remote Commander. REMAINING B AUTO Displays the remaining hard disk free space for about eight seconds as described below. - When your camcorder recognizes the free hard disk space, with the POWER switch is set to (Movie) - When you press DISP/BATT INFO to switch the screen display from off to on, with the POWER switch is set to (Movie) - When the available free space of the hard disk remains less than five minutes for movies - When you start recording from the line input ON Always displays the remaining hard disk free space indicator. REMOTE CTRL (Remote control) The default setting is [ON] so that you can use the supplied Remote Commander (p.41). • Set to [OFF] to prevent your camcorder from responding to a command sent by other device's remote control. • The setting returns to [ON] after you remove the power source for more than five minutes. REC LAMP (Recording lamp) The camera recording lamp will not light up during recording when you set this to [OFF]. (The default setting is [ON].) Continued , 63 Using the Setup items