Sony DCR-TRV350 Operating Instructions - Page 176

Preventing accidental erasure - Image protection You can protect selected images to prevent accidental erasure. Before operation Insert a "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch is set to the left (unlock) position. (2) Play back the image you want to protect. (3) Press MENU to display the menu settings. (4) Turn the SEL/PUSH EXEC dial to select PROTECT in 1 , then press the dial. (5) Turn the SEL/PUSH EXEC dial to select ON, then press the dial. (6) Press MENU to make the menu settings disappear. The - mark is displayed beside the data file name of the protected image. 3,6 MENU 4 MEM SET 1 STILL SET MOVIE SET NEW FOLDER 1 REC FOLDER 2 FILE NO. PRINT MARK PROTECT OFF PB FOLDER RETURN [MENU] : END 21/40 5 MEM SET 1 STILL SET MOVIE SET NEW FOLDER 1 REC FOLDER 2 FILE NO. PRINT MARK PROTECT ON PB FOLDER OFF RETURN [MENU] : END 21/40 MEM SET 1 STILL SET MOVIE SET NEW FOLDER 1 REC FOLDER 2 FILE NO. PRINT MARK PROTECT ON PB FOLDER OFF RETURN [MENU] : END 21/40 MEM SET 1 STILL SET MOVIE SET NEW FOLDER 1 REC FOLDER 2 FILE NO. PRINT MARK PROTECT ON PB FOLDER RETURN [MENU] : END 21/40 To cancel image protection Select OFF in step (5), then press the SEL/PUSH EXEC dial. The - mark disappears from the image. Note Formatting erases all information on the "Memory Stick," including the protected image data. Before formatting a "Memory Stick," check its contents. If the write-protect tab on the "Memory Stick" is set to LOCK You cannot protect images. 176