Sony DCR-TRV350 Operating Instructions - Page 32
After recording, Adjusting the LCD screen, Recording a picture, After using your camcorder
View all Sony DCR-TRV350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Recording a picture After recording (1) Set the POWER switch to OFF (CHG). (2) Close the LCD panel. (3) Eject the cassette. (4) Attach the lens cap. (5) Remove the battery pack. After using your camcorder Remove the battery pack from your camcorder to avoid turning on the built-in light accidentally. Adjusting the LCD screen The LCD panel can be opened up to 90 degrees. The LCD panel moves about 90 degrees to the viewfinder side and about 180 degrees to the lens side (from the initial opening position). 180° 90° When closing the LCD panel, set it vertically until it clicks, and swing it into the camcorder body. Note When using the LCD screen except in the mirror mode, the viewfinder is automatically turned off. Notes on the LCD screen •When you use the LCD screen outdoors in direct sunlight, the LCD screen may be difficult to see. If this happens, we recommend that you use the viewfinder. •When you adjust angles of the LCD panel, make sure if the LCD panel is opened up to 90 degrees. When recording with the LCD panel opened Recording time becomes a little shorter compared with when recording with the LCD panel closed. 32