Sony DCR-TRV350 Operating Instructions - Page 82
Inserting a scene
View all Sony DCR-TRV350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Inserting a scene You can insert a scene in the middle of a recorded tape by setting the start and end points. The previously recorded frames between these start and end points will be erased. Use the Remote Commander for this operation. [a] [b] (1) In the standby mode, keep pressing EDITSEARCH, and release the button at the insert end point [b]. (2) Press ZERO SET MEMORY on the Remote Commander. The ZERO SET MEMORY indicator flashes and the counter resets to zero. (3) Keep pressing the - 7 side of EDITSEARCH and release the button at the insert start point [a]. (4) Press START/STOP to start recording. The scene is inserted. Recording stops automatically near the counter zero point. Your camcorder returns to the standby mode. The zero set memory function is canceled. ZERO SET MEMORY EDITSEARCH Notes •The zero set memory function does not work with tapes recorded in the Hi8 / standard 8 mm system. •The picture and the sound may be distorted at the end of the inserted section when it is played back. If a tape has a blank portion between recorded portions The zero set memory function may not work correctly. 82