Sony DCR-TRV350 Operating Instructions - Page 34
Using the zoom feature, Recording a picture, To use zoom greater than 20, Notes on digital zoom - digital 8
View all Sony DCR-TRV350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Recording a picture Using the zoom feature Set the POWER switch to CAMERA or MEMORY.* Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom. Using the zoom function sparingly results in better-looking recordings. "T" side: for telephoto (subject appears closer) "W" side: for wide-angle (subject appears farther away) W T WT W T To use zoom greater than 20× Zoom greater than 20× is performed digitally. To activate digital zoom, select the digital zoom power in D ZOOM in the menu settings. The digital zoom function is set to OFF as a default setting (p. 212). The right side of the bar shows the digital zooming zone. W T The digital zooming zone appears when you select the digital zoom power in the menu settings. Notes on digital zoom • Digital zoom power can be set to 40× or 700×. • Digital zoom power can be set to 40× or 560×. • The picture quality deteriorates as you move the power zoom lever towards the "T" side. When you shoot close to a subject If you cannot get a sharp focus, move the power zoom lever to the "W" side until the focus is sharp. You can shoot a subject that is at least about 80 cm (about 2 feet 5/8 inch) away from the lens surface in the telephoto position, or about 1 cm (about 1/2 inch) away in the wide-angle position. * Modes on the POWER switch vary depending on models (p. 16). 34