Sony DCR-TRV350 Operating Instructions - Page 205
Connecting your camcorder to your computer using the USB cable -Macintosh - driver mac
View all Sony DCR-TRV350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Viewing Images on Your Computer Connecting your camcorder to your computer using the USB cable When connecting to a computer using the USB cable You must install a USB driver onto your computer in order to connect the camcorder to the computer's USB connector. The USB driver can be found on the CD-ROM supplied, along with the application software required for viewing images. System requirements OS: Mac OS 8.5.1/8.6/9.0/9.1/9.2 or Mac OS X (v10.0/v10.1) Standard installation is required. However, note that upgrade to Mac OS 9.0/9.1 should be used for the following models: - iMac with the Mac OS 8.6 standard installation and a slot loading type CD-ROM drive - iBook or Power Mac G4 with the Mac OS 8.6 standard installation Others: The USB connector must be provided as standard. QuickTime 3.0 or later must be installed to play back moving pictures. Notes •Operations are not guaranteed for the Macintosh environment if you connect two or more USB equipment to a single computer at the same time, or when using a hub. •Some equipment may not operate depending on the type of USB equipment that is used simultaneously. •Operations are not guaranteed for all the recommended computer environments mentioned above. 205