Sony SRG300SE User Manual (SRG-300SE User's Guide) - Page 44
Multicast streaming, Multicast address 1
View all Sony SRG300SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Setting the Camera Via a Network Video port number 1, 2, 3 Specify the transmission port number of the H.264 video data. The default setting is 50000, 52000 or 54000. Specify an even number from 1024 to 65534. Two port numbers (the number specified here and an odd number with 1 added to the specified number) are actually used for video data communication and control. When performing simultaneous multi-transmission, a different port number will be used for every transmission, based on the port number specified here. The settings for Image 1, Image 2 and Image 3 apply to Video port number 1, 2 and 3 respectively. Audio port number Specify the transmission port number of the audio data. The default setting is 56000. Specify an even number from 1024 to 65534. Two port numbers (the number specified here and an odd number with 1 added to the specified number) are used for audio data communication and control. When performing simultaneous multi-transmission, a different port number will be used for every transmission, based on the port number specified here. Note Specify different numbers for the video port number and the audio port number. RTSP video port number 1, 2, 3 Specify the H.264 video transmission port number used for RTSP unicast streaming. The default setting is 51000, 53000 or 55000. Specify an even number from 1024 to 65534. Two port numbers (the number specified here and an odd number with 1 added to the specified number) are actually used for video data communication and control. When performing simultaneous multitransmission, a different port number will be used for every transmission, based on the port number specified here. The settings for Image 1, Image 2 and Image 3 apply to RTSP video port number 1, 2 and 3 respectively. RTSP audio port number Specify the audio transmission port number used for RTSP unicast streaming. The default setting is 57000. Specify an even number from 1024 to 65534. Two port numbers (the number specified here and an odd number with 1 added to the specified number) are actually used for audio data communication and control. When performing simultaneous multi-transmission, a different port number will be used for every transmission, based on the port number specified here. Multicast streaming Set whether the camera uses multicast streaming for H.264 video data and audio data or not. It reduces the transmission load on the camera by having a computer of the same segment network receive the same transmitting data. Enable Select the checkbox to allow multicast sending. When you select the checkbox, set Multicast address, Video port number and Audio port number properly. Multicast address 1, 2, 3 Type the multicast address used on the multicast streaming. Video port number 1, 2, 3 Specify the H.264 video transmission port number used for the multicast streaming. The default setting is 60000, 62000 or 64000. Specify an even number from 1024 to 65534. Two port numbers (the number specified here and an odd number with 1 added to the specified number) are actually used for video data communication and control. The settings for Image 1, Image 2 and Image 3 apply to Video port number 1, 2 and 3 respectively. Audio port number Specify the audio transmission port number used for the multicast streaming. The default setting is 58000. Specify an even number from 1024 to 65534. Two port numbers (the number specified here and an odd number with 1 added to the specified number) are actually used for audio data communication and control. Note Specify different numbers for the video port number and the audio port number. RTSP multicast address Set the multicast address used on RTSP multicast streaming. RTSP multicast video port number 1, 2, 3 Specify the H.264 video transmission port number used for RTSP multicast streaming. The default setting is 61000, 63000 or 65000. Specify an even number from 1024 to 65534. Two port numbers (the number specified here and an odd number with 1 added to the specified number) are actually used for video data communication and control. The settings for Image 1, Image 2 and Image 3 apply to Video port number 1, 2 and 3 respectively. 44 Setting of the Transmission - Streaming Menu