Sony SRG300SE User Manual (SRG-300SE User's Guide) - Page 47

Operation Using the Remote Controller Operating Multiple Cameras Before operating, you must assign the camera addresses to the connected cameras. Then you can switch the camera to be controlled simply by pressing the corresponding CAMERA button. To assign camera addresses automatically 1 Turn on the power of all the connected cameras and the remote controller. Note After turning on the power of the camera, wait more than two minutes and turn on the power of the remote controller. Otherwise, the connection may not be recognized. 2 Hold down the RESET button and press the POWER button on the remote controller. The remote controller recognizes the connected cameras and assigns them camera addresses 1 to 7 automatically in the connected order. 3 Press the POWER button on the remote controller and check that the CAMERA buttons light. The number of the lit CAMERA buttons indicates how many cameras have the addresses assigned. Now you can switch the camera you want to control with the remote controller by pressing the CAMERA button. Note The connection of the camera and the remote controller is available for RS-422 connection only. Therefore, the number of connected cameras that can be controlled is up to 7. Pan/Tilt and Zoom Operation Panning and Tilting PAN-TILT RESET VALUE - + R BRIGHT JOYSTICK LOCK KNOB MODE - + B FOCUS AUTO AUTO MANUAL POSITION RESET PRESET SHIFT GROUP SELECT POWER NEAR FAR ONE PUSH AF GROUP BLACK PAN-TILT ONE PUSH LIGHT RESET AWB MENU GROUP POSITION 12345678 9 10 11 12 13 14 15 16 CAMERA 1234567 1 2 1 Press the CAMERA button corresponding to the camera you want to operate. 2 Pan or tilt the camera using the joystick. While checking the picture on the screen, incline the joystick in the desired direction. The panning/tilting speed changes according to the angle at which you incline the joystick. Release the joystick to stop panning/tilting. To face the camera back to the front Press the upper button on the joystick for 1 or 2 seconds. Press for 1 or 2 seconds. If you accidentally move the camera with your hand Press the PAN-TILT RESET button to perform the pan/ tilt reset action. 47 Pan/Tilt and Zoom Operation