Sony SRG300SE User Manual (SRG-300SE User's Guide) - Page 50
To recall the stored settings, To cancel the preset memory, POSITION, you cannot call up
View all Sony SRG300SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Operation Using the Remote Controller 4 While holding down the PRESET button (for POSITION 1 to 8) or the PRESET button and the SHIFT button (for POSITION 9 to 16), press any of the GROUP/POSITION buttons in which you want to store the settings. While holding down (for POSITION 1 to 8) RESET PRESET SHIFT Press a POSITION button you want to set. 12345678 9 10 11 12 13 14 15 16 While holding down (for POSITION 9 to 16) The settings are stored in the memory of the camera. The pressed button flashes during storing. Flashing stops when storing is completed. To recall the stored settings Press any of the GROUP/POSITION buttons in which you have stored the settings. For POSITION 9 to 16, hold down the SHIFT button and press any of the GROUP/POSITION buttons. To cancel the preset memory While holding down the RESET button (for POSITION 1 to 8) or the RESET button and the SHIFT button (for POSITION 9 to 16), press the GROUP/POSITION button from which you want to cancel the settings. While holding down (for POSITION 1 to 8) Press a POSITION button RESET you want to cancel. PRESET SHIFT 12345678 9 10 11 12 13 14 15 16 While holding down (for POSITION 9 to 16) The pressed button flashes during canceling of the settings. Flashing stops when the settings have been canceled. Notes • When the power is turned on, the camera starts with the settings stored in POSITION 1. • If you want to retain the previous pan and tilt positions when the power is turned off and turned on again, store those positions in POSITION 1. • When you are storing or canceling the settings in one POSITION, you cannot call up, store or cancel the settings in another POSITION. • When you store the position, zooming, and focusing, etc. of the camera, make sure to install and secure the camera on the place to be used properly. If you change the installations of the camera after storing the settings, the differences may occur in the settings. • You can also set and store the camera settings in POSITION 1 to 16 with operation via a network. Also, the stored settings can be canceled with the operation via a network. • For the setting items can be stored and canceled, see "Preset Items" on page 62. 50 Storing the Camera Settings in Memory - Presetting Feature