Sony SRG300SE User Manual (SRG-300SE User's Guide) - Page 54

White Balance Menu, Picture Menu

Get Sony SRG300SE PDF manuals and user guides View all Sony SRG300SE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

WHITE BALANCE Menu The WHITE BALANCE menu is used to select the white balance mode. You can also set via a Web browser. See "White balance" on page 23. PICTURE Menu The PICTURE menu is used to set the items related to the picture. You can also set via a Web browser. See "Picture" on page 23 or "Installation Tab" on page 20. Setting with the Remote Controller MODE (white balance mode) Select the white balance mode from among the following: AUTO (auto), IN DOOR (indoor), OUT DOOR (outdoor), ONE PUSH (one push), ATW, MANUAL (manual) When you select MANUAL, R.GAIN (R gain) and B.GAIN (B gain) appear. You can select each item in the range from 0 to 255. When you select the ONE PUSH mode Perform the following operations. 1 Zoom in on a large white subject in the center of the screen. 2 Press ONE PUSH AWB button of the remote controller. The one-push white balance adjustment is activated. When DISPLAY INFO (page 56) is set to ON on the SYSTEM menu, the result of the white balance adjustment is displayed on the connected monitor to the SDI output. APERTURE (aperture compensation) Select the aperture compensation level from among MIN, 1 to 14 and MAX. HIGH RESOLUTION (high resolution mode) You can select ON/OFF of HIGH RESO (high resolution mode). When set to ON, you can enjoy emphasized edge and high-resolution images. Note When set to ON, the image is noisier than when set to OFF. NOISE REDUCTION (noise reduction) You can enjoy clearer images by removing unnecessary noise (fixed pattern and randomized noise). You can select 6 levels from OFF (MIN) to 5 (MAX). IMAGE STABILIZER (image stabilizer) You can select the effect of image stabilizer according to the shooting conditions. OFF: The image stabilizer function does not operate. ON: The image stabilizer function operates. When set to ON, you can obtain steadier images if vibration is present. This stabilizer is effective for vibration frequencies around 10 Hz. This function utilizes digital zoom; therefore, the angle of view and resolution of images may be affected. However, image sensitivity is retained. Notes • The image stabilizer function is not effective during pan/tilt operations. It may take some time for the image to stabilize after stopping pan/tilt operations. • If the image stabilizer function is enabled, it may take some time for the image to stabilize after turning on the power of the camera. 54 WHITE BALANCE Menu / PICTURE Menu

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Setting with the Remote Controller
54
WHITE BALANCE Menu / PICTURE Menu
WHITE BALANCE Menu
The WHITE BALANCE menu is used to select the
white balance mode.
You can also set via a Web browser.
See “White balance” on page 23.
MODE (white balance mode)
Select the white balance mode from among the
following:
AUTO (auto), IN DOOR (indoor), OUT DOOR
(outdoor), ONE PUSH (one push), ATW, MANUAL
(manual)
When you select MANUAL, R.GAIN (R gain) and
B.GAIN (B gain) appear. You can select each item in the
range from 0 to 255.
When you select the ONE PUSH mode
Perform the following operations.
1
Zoom in on a large white subject in the center of the
screen.
2
Press ONE PUSH AWB button of the remote
controller.
The one-push white balance adjustment is
activated.
When DISPLAY INFO (page 56) is set to ON on the
SYSTEM menu, the result of the white balance
adjustment is displayed on the connected monitor to the
SDI output.
PICTURE Menu
The PICTURE menu is used to set the items related to
the picture.
You can also set via a Web browser.
See “Picture” on page 23 or “Installation Tab” on
page 20.
APERTURE (aperture compensation)
Select the aperture compensation level from among
MIN, 1 to 14 and MAX.
HIGH RESOLUTION (high resolution mode)
You can select ON/OFF of HIGH RESO (high
resolution mode). When set to ON, you can enjoy
emphasized edge and high-resolution images.
Note
When set to ON, the image is noisier than when set to
OFF.
NOISE REDUCTION (noise reduction)
You can enjoy clearer images by removing unnecessary
noise (fixed pattern and randomized noise). You can
select 6 levels from OFF (MIN) to 5 (MAX).
IMAGE STABILIZER (image stabilizer)
You can select the effect of image stabilizer according to
the shooting conditions.
OFF:
The image stabilizer function does not operate.
ON:
The image stabilizer function operates.
When set to ON, you can obtain steadier images if
vibration is present. This stabilizer is effective for
vibration frequencies around 10 Hz. This function
utilizes digital zoom; therefore, the angle of view and
resolution of images may be affected. However, image
sensitivity is retained.
Notes
•
The image stabilizer function is not effective during
pan/tilt operations. It may take some time for the
image to stabilize after stopping pan/tilt operations.
•
If the image stabilizer function is enabled, it may take
some time for the image to stabilize after turning on
the power of the camera.