Sony SRG300SE User Manual (SRG-300SE User's Guide) - Page 56

Setting the range of the RIGHT/LEFT movement (Eflip: OFF) CENTER (0°) -170° +170° SYSTEM Menu Setting the range of the UP/DOWN movement (Eflip: OFF) (Eflip: ON) +90° 0° -20° +20° 0° -90° Note When you turn the camera to the right or left beyond the 100° with the camera pointed downward by 20°, the camera may be caught on the lens, depending on the zoom position of the lens. PAN/TILT SLOW (low Pan-Tilt mode) When this function is set to ON, the active speed of PAN/TILT will be slow and it is easy to shoot slowmoving objects. D-ZOOM (digital zoom) You can set digital zoom to ON or OFF. When set to OFF, digital zoom does not operate, and only optical zoom is available. When set to ON, digital zoom takes over after optical zoom reaches MAX (×30). Up to maximum ×360 can be zoomed digitally. DISPLAY INFO When this item is set to ON, the message automatically appears for about 3 seconds on the external monitor screen that is connected to the SDI OUT connecter when you perform the following operations using the remote controller. Message PRESET n OK "n" is a preset position number. RECALL n OK "n" is a preset position number. RESET n OK "n" is a preset position number. ONE PUSH WB:OP ONE PUSH WB:OK ONE PUSH WB:NG Operation using the remote controller You have stored the camera settings to POSITION 1 to 16. You have read the camera settings stored in POSITION 1 to 16. You have reset the camera settings stored in POSITION 1 to 16. During the white balance adjustment in the ONE PUSH white balance mode, the message flashes on the screen. When white balance adjustment is correctly performed in ONE PUSH white balance mode, this message appears on the screen. If white balance adjustment is incorrectly performed in ONE PUSH white balance mode, this message flashes on the screen. Note These messages are not displayed for the operation via a network. Setting with the Remote Controller 56 SYSTEM Menu