Home » Sony Manuals » Video Cameras » Sony SRG300SE » Manual Viewer

Sony SRG300SE User Manual (SRG-300SE User's Guide) - Page 8

Operating Multiple Cameras Using the Remote Controller

Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Overview Operating Multiple Cameras Using the Remote Controller What you can do with this system • You can operate up to 7 cameras with daisy chain connection using the remote controller (not supplied). System Configuration Camera HD video monitor, VTR, etc. Camera Camera Video switcher Remote Controller (not supplied) Video signal Remote Control (VISCA) signal , Signal flow Notes • Only RS-422 connection is available for VISCA CONTROL. • You need to match the communication speed between the camera and the remote controller. • If you change the settings of the communication speed and video format, operate it using the browser display via a network. * You cannot change the settings from the menu display connected with the SDI OUT connector. 8 System Configuration

Section	Page
Table of Contents	2
Overview	4
Features	4
How to Use This User’s Guide	5
System Configuration	6
Operating the Camera Via a Network	6
Operating a Camera Using the Remote Controller	7
Operating Multiple Cameras Using the Remote Controller	8
Precautions for Preventing Access to the Camera by an Unintended Third Party	9
How to set up	9
Operating the Camera Via a Network	10
Accessing the Camera Using the Web Browser	10
About Viewers	10
Operating the Camera	12
Main menu	12
Monitor screen	12
ActiveX viewer control panel section	12
Plug-in free viewer control bar	14
Pan/Tilt and Zoom Operation	15
Controlling via the control panel	15
Controlling via the preset position panel	15
Controlling using the monitor screen	16
Switching Transmission Mode	17
Setting the Camera Via a Network	18
Basic Operations of the Administrator Menu	18
How to set up the Administrator menu	18
Configuration of the Administrator menu	18
Configuring the System - System Menu	19
Information Tab	19
Date & time Tab	19
Installation Tab	20
Initialize Tab	21
System log Tab	22
Access log Tab	22
Setting the Camera Image - Video Menu	22
Picture Tab	22
Video codec Tab	24
Superimpose Tab	25
Day/Night ICR Tab	26
Setting the Camera Audio - Audio Menu	27
Audio Tab	27
Configuring the Network - Network Menu	28
Network Tab	28
QoS Tab	29
Setting the Security - Security Menu	31
Administrator and User	31
User Tab	31
Access limit Tab	32
SSL Tab	33
How to install the CA certificate	35
To remove an installed CA certificate	37
802.1X Tab	38
System configuration of 802.1X network	38
Referer check Tab	40
Setting the PTZF control - PTZF control Menu	41
PTZF control Tab	41
Preset position Tab - Saving pan/tilt/zoom position	42
Serial Tab	42
Setting of the Transmission - Streaming Menu	43
Streaming Tab	43
Operation Using the Remote Controller	46
Preparation	46
Operating Multiple Cameras	47
Pan/Tilt and Zoom Operation	47
Panning and Tilting	47
Zooming	48
Adjusting the Camera	48
Focusing on a Subject	48
Shooting with Back Lighting	49
Adjusting the White Balance	49
Storing the Camera Settings in Memory - Presetting Feature	49
Storing Camera Settings	49
Setting with the Remote Controller	51
About On-Screen Menus	51
Operating with the Remote Controller	51
Main Menu	51
Setting Menu	51
Control Button Display Section	52
EXPOSURE Menu	53
WHITE BALANCE Menu	54
PICTURE Menu	54
PAN TILT ZOOM Menu	55
SYSTEM Menu	56
STATUS Menu	57
Others	58
Message List	58
Troubleshooting	59
Menu Configuration	60
Preset Items	62
Glossary	63