TP-Link 13dBi CPE510 V1 UG - Page 38
Dynamic WAN, AP router, AP client router WISP Client, Client Name, MAC Address, Lease Time
View all TP-Link 13dBi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 4 Status Tab Client Name Displays the device name of the client. MAC Address Displays the client's MAC Address. IP Address Displays the IP address assigned to the client. Lease Time Displays the time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically. Auto Refresh If Auto Refresh is checked, parameters in the table will refresh automatically. Dynamic WAN NOTE: This submenu is only available in AP router mode and AP client router (WISP Client) mode when the WAN connection type is PPPoE, PPTP, L2TP or Dynamic. Dynamic WAN displays the WAN connection status of your device. Status Displays the WAN status is disconnected or connected. IP Address Displays the IP address of the WAN. Subnet Mask Displays the Subnet Mask of the WAN. Gateway IP Displays the address of the gateway. Primary DNS/Secondary DNS Displays the DNS IP address provided by your ISP. Connection Uptime Displays the time that the latest WAN connection lasts. - 35 -