TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 111
dot1x guest-vlaninterface, 10 dot1x port-control
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Example Enable the IEEE 802.1X function for the Ten-Gigabit Ethernet port 1/0/1: T1700X-16TS(config)#interface ten-gigabitEthernet 1/0/1 T1700X-16TS(config-if)#dot1x 16.9 dot1x guest-vlan(interface) Description The dot1x guest-vlan command is used to enable the guest VLAN function for a specified port. To disable the Guest VLAN function for a specified port, please use no dot1x guest-vlan command. Please ensure that the Control Type of the corresponding port is port-based before enabling the guest VLAN function for it. Syntax dot1x guest-vlan no dot1x guest-vlan Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range gigabitEtherne) Example Enable the Guest VLAN function for Ten-Gigabit Ethernet port 1/0/2: T1700X-16TS(config)#interface ten-gigabitEthernet 1/0/2 T1700X-16TS(config-if)#dot1x guest-vlan 16.10 dot1x port-control Description The dot1x port-control command is used to configure the Control Mode of IEEE 802.1X for the specified port. By default, the control mode is "auto". To restore to the default configuration, please use no dot1x port-control command. Syntax dot1x port-control {auto | authorized-force | unauthorized-force} no dot1x port-control 97