TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 173
loopback-detection config, 6 loopback-detection recover
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
24.5 loopback-detection config Description The loopback-detection config command is used to configure the process-mode and recovery-mode for the ports by which the switch copes with the detected loops. Syntax loopback-detection config [ process-mode { alert | port-based }] [ recovery-mode { auto | manual }] Parameter process-mode -- The mode how the switch processes the detected loops. Alert: When a loop is detected, display an alert. Port based: When a loop is detected, display an alert and block the port. recovery-mode -- The mode how the blocked port recovers to normal status. Auto: Block status can be automatically removed after recovery time. Manual: Block status can only be removed manually. Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Example Configure the loopback detection process-mode as port-based and recovery-mode as manual for port 2: T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/2 T1700X-16TS(config-if)# loopback-detection config process-mode port-based recovery-mode manual 24.6 loopback-detection recover Description The loopback-detection recover command is used to remove the block status of selected ports, recovering the blocked ports to normal status, Syntax loopback-detection recover Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet) 159