TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 178
access-list policy name
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
destination-ip-mask -- The destination IP address mask. It is required if you typed the destination IP address. s-port -- The source port number. d-port -- The destination port number. protocol -- Configure the value of the matching protocol. Command Mode Global Configuration Mode Example Create an Extended-IP ACL whose ID is 2220, and add Rule 10 for it. In the rule, the source IP address is 192.168.0.100, the source IP address mask is 255.255.255.0, and the packets match this rule will be forwarded by the switch: T1700X-16TS(config)# access-list create 2220 T1700X-16TS(config)# access-list extended 2220 rule 10 permit sip 192.168.0.100 smask 255.255.255.0 25.4 access-list policy name Description The access-list policy name command is used to add Policy. To delete the corresponding Policy, please use no access-list policy name command. A Policy is used to control the data packets those match the corresponding ACL rules by configuring ACLs and actions together for effect. Syntax access-list policy name name no access-list policy name name Parameter name -- The Policy Name, ranging from 1 to 16 characters. Command Mode Global Configuration Mode Example Add a Policy named policy1: T1700X-16TS(config)# access-list policy name policy1 164